Sublimation Stainless Steel Mug

More information about the stainless steel mug for sublimation

• Ideal and practical to take on walks, trips, schools, nurseries and so on.
• Unbreakable. Drop and shock-resistant.
• Food grade.
• Helps to maintain the temperature of the liquid.
• Can be personalised with other techniques such as DTF printing, laser engraving, screen printing, transfer, HTV and more.
• Printable all over, except for the handle.
• Suitable for personalising with a heat press machine using 10 oz mug heaters. Including a sublimation oven using clamps, silicone sheets or heat shrink bags.
• Delivered in an individual cardboard box.

THINGS TO KEEP IN MIND

• Not suitable for the microwave as it is metallic.
• Before personalising the mug, please note that the chrome colour will blend in with the colours of the image that you want to sublimate. The image’s original colours are likely to change when printed on the mug. One way to minimise this effect is choosing dark or intense colours.

DIMENSIONS (APPROX.)

Recommended instructions and parameters for sublimation printing

WITH A MUG HEAT PRESS

• Print the design in mirror image.
• Preheat the press to 180ºC
• Hold the paper's printed side against the mug and fix it with heat resistant tape.
• Press for 90-120 seconds, medium pressure.
• Using a protective glove, remove the newly printed mug.
• Carefully peel off the paper.

WITH A SUBLIMATION OVEN

• Print the design in mirror image.
• Preheat the press to 180ºC
• Hold the paper's printed side against the mug and fix it with heat-resistant tape.
• Adjust the clamp, or place the mug in a heat shrink bag and heat it with a heat gun. Make sure you get rid of all the wrinkles. You can also use a silicone sheet.
• Sublimate in the oven for 6-7 minutes
• Using a protective glove, remove the wrap, the silicone sheet, or the bag, depending on the accessory you used.
• Carefully remove the paper from the mug.