The store will not work correctly in the case when cookies are disabled.
The legal stuff about cookies:
This message requires us to tell you about our cookie policy. If you continue browsing, we'll assume you accept it and think it's okay.
Don't worry, this message only comes up once.
More information about the stainless steel hip mug with carabiner handle for sublimation
Ideal for school, kindergarten, trips, walks, hiking, camping, fishing and much more.
Practical red carabiner handle you can clip onto your rucksack, belt or trouser loop. Can also be hung on the tent to keep it handy.
Carabiner screwed to the side of the mug with invisible screws inside.
Lightweight, unbreakable cup. Drop and shock-resistant.
Food grade.
Helps to maintain the temperature of the liquid.
Available in white and silver, both customisable on all the outer surfaces except for the handle.
Orca certification attached to the base as a sticker. Guarantees an excellent mug coating
Suitable for personalising with a heat press machine using 10 oz mug heaters. Also, with a sublimation oven using clamps, silicone sheets or heat shrink bags.
Can also be personalised with other techniques such as DTF, laser engraving, screen printing, transfer and self-adhesive vinyl.
Delivered in an individual cardboard box.
THINGS TO KEEP IN MIND
Not suitable for microwave as it is metallic.
Before personalising the silver mug, please note that the chrome colour will blend in with the colours of the image that you want to sublimate. The image’s original colours are likely to change when printed on the mug. One way to minimise this effect is to choose dark or strong colours.
DIMENSIONS (APPROX.)
Maximum capacity
10 oz ≈ 300 ml
Diameter
Ø7.8 cm
Height
8.8 cm
Thickness
3 mm
Carabiner handle
0.7 x 7.5 cm
Mug-to-handle distance
3.8 cm
Print area
23 x 9 cm
Packaging
11 x 9.7 x 8.3 cm
Weight
150 g
Recommended instructions and parameters for sublimation printing
WITH A MUG HEAT PRESS
Print the design in mirror image.
Preheat the press to 180ºC
Hold the paper's printed side against the mug and fix it with heat resistant tape.
Press for 90-120 secondsmedium pressure.
Using a protective glove, remove the newly printed mug.
Carefully remove the paper.
WITH A SUBLIMATION OVEN
Print the design in mirror image.
Preheat the press to 180ºC
Hold the paper's printed side against the mug and fix it with heat-resistant tape.
Adjust the clamp, or place the mug in a heat shrink bag and heat it with a heat gun. Make sure you get rid of all the wrinkles. You can also use a silicone sheet.
Sublimate in the oven for 6-7 minutes
Using a protective glove, remove the wrap, the silicone sheet, or the bag, depending on the accessory you used.