Loading..

Product was successfully added to your shopping cart.
€7.95

Sublimation Water Bottle - 500ml - Insulated - Stainless Steel - White

Ref. 037028

Sublimation Water Bottle - 500ml - Insulated - Stainless Steel - White

  • Sublimation Water Bottle - 500ml - Insulated - Stainless Steel - Personalised example
  • Sublimation Water Bottle - 500ml - Insulated - Stainless Steel - Cap and nozzle details
  • Sublimation Water Bottle - 500ml - Insulated - Stainless Steel - Bottom and cap details
  • Sublimation Water Bottle - 500ml - Insulated - Stainless Steel - Presentation box
€7.95

Sublimation Water Bottle - 500ml - Insulated - Stainless Steel - White

Ref. 037028

A 17oz insulated bottle you can personalise using sublimation printing.

  • Made of stainless steel with a white polyester coating with gloss finish on the outside.
  • Inside insulation to keep liquids hot or cold for a long time.
  • Print area: Ø7 x 12 cm

More information about the 500ml stainless steel insulated water bottle.

How to sublimate this bottle?

+ Read More
- Read Less
Availability:
  • Immediate: 68 units
  • Orders that exceed our availability are generally served in approx. 30 working days.

€7.95
/ Each Unit VAT not included
  • Buy 10 for €7.39 each

Brildor Club is a direct discount program for your purchases. Whenever you place an order (minimum purchase of €10), some discount balance will be generated into your customer account for you to use on your next purchase. The more you buy, the more you save.
You will get access to the Brildor Club as soon as you register as a new customer, and will receive a €5 welcome balance.

 

How do I get some discount balance?


As a Regular Brildor Member:

  • On orders up to €180, you may receive €0.20 for every €10 you spend
  • On orders over €180, you may receive €0.30 for every €10 you spend
  • We will give you an extra €10 if you make 10 purchases over €100


As a Premium Brildor Member:

If you are a Premium Member of the Brildor Club, you will accumulate 25% more balance, so you can obtain:

  • On orders up to €180, you may receive €0.25 for every €10 you spend
  • On orders over €180, you may receive €0.375 for every €10 you spend

  

Who are Premium Brildor Members?


If over the last 12 months your purchases have exceeded €3,000, you will automatically be upgraded to the Premium Brildor Member category. This amount is checked daily. As soon as you reach it, you will become a Premium Member the day after.

 

Terms and conditions of the Brildor Club

  • Loyalty balance will be added when placing an order with an immediate payment method (Credit/debit card, Paypal and Pagantis).
  • Your balance will show in the "Your credit" section inside "Your account", and you can use it by selecting "Payment methods".
  • You can use your balance without needing to have a minimum accumulated amount or reach a minimum order value. Nonetheless, you won't be able to get a higher discount than your order value.
  • Balance expires after 6 months without making any purchase.
  • The balance is calculated on the net amount of the purchase: excluding taxes, shipping, coupons, and promotional discounts.
  • The cancellation of an order implies the loss of the balance generated in that purchase.
  • On a full-order return, the amount to be refunded will be the amount paid by the customer.
  • If the return of the order is due to causes beyond the control of Brildor, the redeemed balance won't be restored. However, the balance generated with this purchase won't be removed.
Sublimation Water Bottle - 500ml - Insulated - Stainless Steel - White Description

More information about the 500ml stainless steel insulated water bottle

  • Double-walled for thermal insulation inside.
  • Type 201 Stainless Steel inside and Type 301 on the outside.
  • Anti-drip screw cap. Made of 304 Stainless Steel with BPA-Free plastic inside (free of Bisphenol A).
  • Comes in an individual white cardboard case.
  • It is recommended to use a 6-10oz Mug Heater for Mug Presses.
  • This water bottle can be sublimated in a Sublimation Oven, either with a wrap, a silicone sheet or heat shrink bags.
  • In Related Products, you will find some accessories that you can use for heat-press or oven sublimation.
  • Because of the bottle irregular shape, printing its whole white area can be a complex task that requires a lot of expertise. In particular, the neck part can be hard to print when using images with a dark background or great detail. For it to be easier, and to obtain better results, it is recommended to only sublimate the cylindrical body of the bottle.

DIMENSIONS (APPROX.)

Volume capacity 500 ml ≈ 17oz
Bottle Ø7 x 26.5 cm
Cap Ø4 x 5 cm
Bore Ø3.5 cm
Box 7.5 x 28.5 x 7.5 cm
Print area (body) Ø7 x 12 cm

Recommended instructions and parameters for sublimation printing

WITH A MUG HEAT PRESS

  • Print the design in mirror image.
  • Preheat the press to 200ºC.
  • Remove the cap from the bottle.
  • Place the bottle in the press with the paper's printed side against it. Attach them with heat resistant tape.
  • Close the press at medium pressure for 35 seconds.
  • Using a protective glove, remove the newly printed bottle.
  • Remove the paper carefully.

WITH A SUBLIMATION OVEN

  • Print the design in mirror image.
  • Preheat the press to 200ºC.
  • Remove the cap from the bottle.
  • Hold the paper's printed side against the bottle and fix it with heat resistant tape.
  • Place and adjust the wrap around it, or introduce it in a heat shrink bag and create a vacuum with a heat gun. You can also use a silicone sheet.
  • Sublimate in the oven for 5 minutes.
  • Using a protective glove, remove the wrap, the silicone sheet, or the bag depending on the accessories you used.
  • Carefully remove the paper from the bottle.
Additional Information
Reference nº 037 028
Net Weight (kg) 0.310
Gross Weight (kg) 0.352
Billable Weight 0.3870
Dimensions (mm) Ø70 x 265
Print area (mm) Ø70 x 120
Colour Silver, White
Surface material Steel
Items Thermos
Marking techniques Sublimation
Post your question

Questions and Answers

There are no entries.

Sublimation Water Bottle - 500ml - Insulated - Stainless Steel - White Description

More information about the 500ml stainless steel insulated water bottle

  • Double-walled for thermal insulation inside.
  • Type 201 Stainless Steel inside and Type 301 on the outside.
  • Anti-drip screw cap. Made of 304 Stainless Steel with BPA-Free plastic inside (free of Bisphenol A).
  • Comes in an individual white cardboard case.
  • It is recommended to use a 6-10oz Mug Heater for Mug Presses.
  • This water bottle can be sublimated in a Sublimation Oven, either with a wrap, a silicone sheet or heat shrink bags.
  • In Related Products, you will find some accessories that you can use for heat-press or oven sublimation.
  • Because of the bottle irregular shape, printing its whole white area can be a complex task that requires a lot of expertise. In particular, the neck part can be hard to print when using images with a dark background or great detail. For it to be easier, and to obtain better results, it is recommended to only sublimate the cylindrical body of the bottle.

DIMENSIONS (APPROX.)

Volume capacity 500 ml ≈ 17oz
Bottle Ø7 x 26.5 cm
Cap Ø4 x 5 cm
Bore Ø3.5 cm
Box 7.5 x 28.5 x 7.5 cm
Print area (body) Ø7 x 12 cm

Recommended instructions and parameters for sublimation printing

WITH A MUG HEAT PRESS

  • Print the design in mirror image.
  • Preheat the press to 200ºC.
  • Remove the cap from the bottle.
  • Place the bottle in the press with the paper's printed side against it. Attach them with heat resistant tape.
  • Close the press at medium pressure for 35 seconds.
  • Using a protective glove, remove the newly printed bottle.
  • Remove the paper carefully.

WITH A SUBLIMATION OVEN

  • Print the design in mirror image.
  • Preheat the press to 200ºC.
  • Remove the cap from the bottle.
  • Hold the paper's printed side against the bottle and fix it with heat resistant tape.
  • Place and adjust the wrap around it, or introduce it in a heat shrink bag and create a vacuum with a heat gun. You can also use a silicone sheet.
  • Sublimate in the oven for 5 minutes.
  • Using a protective glove, remove the wrap, the silicone sheet, or the bag depending on the accessories you used.
  • Carefully remove the paper from the bottle.

Additional Information

Reference nº 037 028
Net Weight (kg) 0.310
Gross Weight (kg) 0.352
Billable Weight 0.3870
Dimensions (mm) Ø70 x 265
Print area (mm) Ø70 x 120
Colour Silver, White
Surface material Steel
Items Thermos
Marking techniques Sublimation
Post your question

Questions and Answers

There are no entries.

The legal stuff about cookies:


This message requires us to tell you about ourcookie policy.

If you continue browsing, we'll assume you accept it and think it's okay.

Don't worry, this message only comes up once.