More information about the Sublimation Enamel Mug in colours

INDEX

> Description

> Dimensions (approx.)

> Recommended instructions and parameters for sublimation printing

DESCRIPTION

• Elegant edge chrome plating
• Enamelled effect
• Available in four colours: red, blue, green and yellow
• Suitable for food consumption
• Comes in a box individual white cardboard designed for the mug
• Not suitable for microwave
• We recommend washing by hand
• Due to the retro style of the mug, the loss of paint from the enamel is regular
• When sublimating the mugs you must take into account that the printed design can vary in shade

DIMENSIONS (APPROX.)

RECOMMENDED INSTRUCTIONS AND PARAMETERS FOR SUBLIMATION PRINTING

Parameters are given as a guide only. They may vary due to many factors such as the paper used, the inks or ambient temperature. For this reason, it is recommended to carry out tests.

CUP GRIDDLE

• Print the design in mirror image
• Preheat the press to 180 °C
• Place the paper with the printed side on the mug and fix it with thermal adhesive tape
• Close the press at medium-high pressure for 90-120 seconds
• With the help of a protective glove, remove the freshly sublimated mug to the freshly sublimated film
• Carefully peel off the paper

SUBLIMATION OVEN

• Print the design in mirror image
• Heat the oven to 180 °C
• Place the printed design in mirror image around the mug and fix it using adhesive heat tape
• Tighten the clamp, or insert the mug into a heat-shrinkable bag to heat shrink and heat it with the heat shrink stripping gun You can also use a heat shrink wrap to avoid wrinkles silicone sheet
• You can also use a mug in the oven for 6 minutes
• Using a protective glove, remove the wrap, the silicone sheet, or the bag, depending on the accessory you used
• Carefully peel off the paper of the mug