Search
/ Each Unit
Starting at:
€1.61
Sublimation Mug - Coloured Inside
Ref.
910676
A high-quality mug you can personalise using dye sublimation printing.
- Made of white ceramic with gloss finish. Inner area is in the chosen colour.
- 11 oz ≈ 325 ml capacity.
- Print area: 24 x 9.5 cm
Availability:
Make a selection first
As a Premium Brildor Member, for each unit you buy, you will accumulate {{POINTS}}
to redeem on your next order. Discover the Brildor Loyalty Program.
For each unit you buy, you will accumulate {{POINTS}} to redeem
on your next order. Discover the Brildor Loyalty Program.
Sublimation Mug - Coloured Inside
Related Products
More information about the mug for sublimation with colour inside
- Cylindrical shape, suitable for sublimation on all its outer area.
- Customisable with a heat press, a sublimation oven and a 3D Vacuum press.
- Dishwasher and microwave safe.
- In Related Products, you may find some mug wraps and mug heaters to sublimate this type of mugs.
- Inside the sublimation oven, it is also possible to use heat shrink bags or silicone sheets. These options are also available in Related Products.
- Does not include a box. In Related Products, you may find some models that can be purchased separately.
DIMENSIONS (APPROX.)
| Volume capacity | 11 oz ≈ 325 ml |
| Base | Ø8.2 cm |
| Inner diameter | 7.6 cm |
| Outer diameter | 8.2 cm |
| Height | 9.6 cm |
| Handle | 1.4 x 7.8 cm |
| Thickness | 3 mm |
| Mug-handle distance | 4 cm |
| Print area | 24 x 9.5 cm |
Recommended instructions and parameters for sublimation printing
WITH A MUG HEAT PRESS
- Print the design in mirror image.
- Preheat the press to 200ºC.
- Hold the paper's printed side against the mug and fix it with heat resistant tape.
- Close the press at medium-heavy pressure for 180 seconds.
- Using a protective glove, remove the newly printed mug.
- Remove the paper carefully.
WITH A SUBLIMATION MUG OVEN/3D VACUUM
- Print the design in mirror image.
- Preheat the press to 200ºC.
- Hold the paper's printed side against the mug and fix it with heat resistant tape.
- Place the wrap or the silicone sheet around the mug. You can also introduce the mug into a heat shrink bag and create a vacuum with a heat gun.
- Put the mug in the oven for 15 minutes.
- Using a protective glove, remove the newly printed mug.
- Remove the paper carefully.
| Ref. | 910676 |
|---|---|
| Dimensions (mm) | Ø82 x 96 |
| Print area (mm) | 240 x 95 |
| Thickness (mm) | 3 |
| Colour | Black, Blue, Brown, Green, Light Blue, Light Green, Orange, Pink, Red, Yellow |
| Surface material | Ceramic |
| Items | Mugs |
| Marking techniques | Dye sublimation |
Post your question