The store will not work correctly in the case when cookies are disabled.
The legal stuff about cookies:
This message requires us to tell you about our cookie policy. If you continue browsing, we'll assume you accept it and think it's okay.
Don't worry, this message only comes up once.
More information about the coloured inside ceramic container for sublimation
Cup-like container without handle for multiple purposes: tumbler, pencil holder, flower pot, vase, kitchen utensil container, toothbrush holder, candy jar and so on.
Cylindrical body with white exterior and interior available in different colours.
The entire outer surface can be personalised.
Suitable for sublimation with a heat press machine using 11 oz mug heaters. Also, with sublimation oven using clamps, silicone sheets or heat shrink bags.
Can also be personalised with other techniques such as DTF, screen printing, transfer and self-adhesive vinyl.
DIMENSIONS (APPROX.)
Capacity
11 oz ≈ 325 ml
Upper diameter
Ø8,2 cm
Base
Ø8,2 cm
Height
9.6 cm
Thickness
3 mm
Print area
26.4 x 9.5 cm
Weight
327 g
Recommended instructions and parameters for sublimation printing
WITH A MUG HEAT PRESS
Print the design in mirror image.
Preheat the press to 200ºC
Hold the paper's printed side against the container and fix it with heat-resistant tape.
Press for 180 seconds, medium-heavy pressure.
Remove the newly printed container using a protective glove.
Carefully remove the paper.
WITH A SUBLIMATION OVEN
Print the design in mirror image.
Preheat the oven to 180ºC
Hold the paper's printed side against the container and fix it with heat-resistant tape.
Adjust the clamp, insert it in a heat shrink bag or create a vacuum with a heat gun. You can also use a silicone sheet.
Sublimate inside the oven for 13 minutes
Using a protective glove, remove the wrap, the silicone sheet, or the bag, depending on the accessories you used.