Sublimable Magic Mugs
Sublimable Magic Mugs
11 oz customisable mugs by sublimation.
The black colour gradually disappears to reveal the sublimated image when hot liquid is added inside.
- Glossy or matte black ceramic. White interior
- Microwave safe
- Customisable area: 23.5 x 9.7 cm
Related Products
More information about the Sublimable Magic Mugs
INDEX
> Recommended sublimation instructions and parameters
DESCRIPTION
- Perfect as souvenirs, as well as for events and special occasions like birthdays, surprise parties, magic shows...
- Thermochromic. They change colour with temperature. The black colour gradually disappears when filled with hot liquid, revealing the sublimated image, and returns to the initial colour when cooled, hiding the image
- Cylindrical body with a black exterior, suitable for sublimation. White interior
- Suitable for customization with a transfer press using 11 oz resistances. Also with a sublimation oven using clamps, silicone sheets, or shrink bags
- In Related Products you will find different models of boxes to present or transport this mug
THINGS TO KEEP IN MIND
- They are personalized like any sublimation mug, no special treatment or coating is required
- The sublimated image will be slightly visible on the black surface of the mug, like a negative image
MEASUREMENTS
| Capacity (oz ≈ ml) | 11 ≈ 325 |
| Customizable area (cm) | 23.5 x 9.7 |
| Inner diameter (cm) | Ø7.6 |
| Base (cm) | Ø8 |
| Height (cm) | 9.7 |
| Thickness (mm) | 3 |
| Handle (cm) | 1.4 x 7.4 |
| Distance mug-handle (cm) | 4 |
RECOMMENDED SUBLIMATION INSTRUCTIONS AND PARAMETERS
Parameters are indicative and may vary due to factors such as the paper used, inks, or ambient temperature. Therefore, it is recommended to conduct tests.
WITH MUG PRESS
- Print the design in mirror mode
- Heat the press to 180 ºC
- Place the paper with the printed side on the mug and secure it with thermal adhesive tape
- Close the press with medium-high pressure for 200 seconds
- Using a protective glove, remove the freshly sublimated mug
- Carefully remove the paper
WITH SUBLIMATION OVEN
- Print the design in mirror mode
- Heat the oven to 180 ºC
- Place the printed design in mirror mode around the mug and secure it using thermal adhesive tape
- Adjust the clamp, or place the mug inside a shrink bag and heat with a heat gun to avoid wrinkles. You can also use a silicone sheet
- Sublimate in the oven for 13-15 minutes
- Using a protective glove, remove the clamp, silicone sheet, or shrink bag, as applicable
- Carefully remove the paper from the mug
| Ref. | 944028 |
|---|---|
| Print area (mm) | 235 x 97 |
| Thickness (mm) | 3 |
| Colour | Black |
| Surface material | Ceramic |
| Items | Mugs |
| Marking techniques | Dye sublimation |
Reviews
Share your opinion
It will only take a minute, and your opinion can help other customers.
Sign in to submit your review
Write a review
Marta
Verified Buyer
28 May 2026
From Brildor Español
Mario
Verified Buyer
27 May 2026
From Brildor Español
JAIME ANDRES
9 Jan 2026
From Brildor Español
Joaquin
Verified Buyer
28 Dec 2025
From Brildor Español
Diana
Verified Buyer
19 Dec 2025
From Brildor Español
Gonzalo
Verified Buyer
12 Dec 2025
From Brildor Español
Mariluz Jesus
Verified Buyer
15 Oct 2025
From Brildor Español
Marta
Verified Buyer
15 Oct 2025
From Brildor Español
Betty
Verified Buyer
23 Aug 2025
From Brildor Español
Gabriela Coromoto
Verified Buyer
20 Aug 2025
From Brildor Español
Questions
No questions found for this product.
Be the first to ask a question!
Ask a question