More information about the glow in the dark sublimation mug

• Perfect for Halloween, anniversaries, birthdays, surprise parties and other special events.
• Formed by particles that absorb light energy, which is then released slowly and continuously, emitting light in dark spaces. The mug must be previously exposed to ultraviolet light, e.g. sunlight or light from a lamp.
• The yellowish colour of the personalisation area turns greenish in the dark.
• Suitable for personalising with a heat press machine using 10 oz mug heaters. Including a sublimation oven using clamps, silicone sheets or heat shrink bags.
• In the Related Products, you will find some models of boxes that can be purchased separately.

THINGS TO KEEP IN MIND

• Can be personalised like any other sublimation mug; no special treatment or coating is required.
• Avoid dishwasher use to ensure longer life of the photoluminescent coating.

DIMENSIONS (APPROX.)

Recommended instructions and parameters for sublimation printing

WITH A MUG HEAT PRESS

• Print the design in mirror image.
• Preheat the press to 180ºC
• Hold the paper's printed side against the mug and fix it with heat-resistant tape.
• Press for 200 seconds, medium-heavy pressure.
• Remove the newly printed mug using a protective glove.
• Carefully peel off the paper.

WITH A SUBLIMATION OVEN

• Print the design in mirror image.
• Preheat the press to 200ºC
• Hold the paper's printed side against the mug and fix it with heat-resistant tape.
• Adjust the clamp, or place the mug in a heat shrink bag and heat it with a heat gun. Make sure you get rid of all the wrinkles. You can also use a silicone sheet.
• Sublimate inside the oven for 8 minutes
• Using a protective glove, remove the wrap, the silicone sheet, or the bag, depending on the accessory you used.
• Carefully peel off the paper from the mug.