Loading..

Product was successfully added to your shopping cart.
€7.90

Sublimation Beer Stein - Frosted Glass - Pack of 2 units

Ref. 004050

Sublimation Beer Stein - Frosted Glass - Personalised

  • Sublimation Beer Stein - Frosted Glass - Personalised
  • Sublimation Beer Stein - Frosted Glass
  • Sublimation Beer Stein - Frosted Glass - 1
  • Sublimation Beer Stein - Frosted Glass - 2
  • Sublimation Beer Stein - Frosted Glass - 3
  • Sublimation Beer Stein - Frosted Glass - Dimensions
€7.90

Sublimation Beer Stein - Frosted Glass - Pack of 2 units

Ref. 004050

A high-quality beer mug you can personalise using sublimation printing.

  • Made of translucent frosted glass with matte finish.
  • Sale unit: 2-stein pack.
  • Print area: 22 x 14 cm

More information about the frosted glass beer stein.

How to sublimate this mug?

+ Read More
- Read Less
Availability:
  • Immediate: 0 units
  • Expected entry the 18/12/2020: more than 100 units
  • If you want to schedule an order that exceeds our TOTAL availability, please contact customersupport@brildor.com including the reference of the product you are interested in. This does not apply to products in the outlet section.

€7.90
/ Each Unit VAT not included
  • Buy 24 for €7.10 each
  • Buy 96 for €6.32 each

Brildor Club is a direct discount program for your purchases. Whenever you place an order (minimum purchase of €10), some discount balance will be generated into your customer account for you to use on your next purchase. The more you buy, the more you save.
You will get access to the Brildor Club as soon as you register as a new customer, and will receive a €5 welcome balance.

 

How do I get some discount balance?


As a Regular Brildor Member:

  • On orders up to €180, you may receive €0.20 for every €10 you spend
  • On orders over €180, you may receive €0.30 for every €10 you spend
  • We will give you an extra €10 if you make 10 purchases over €100


As a Premium Brildor Member:

If you are a Premium Member of the Brildor Club, you will accumulate 25% more balance, so you can obtain:

  • On orders up to €180, you may receive €0.25 for every €10 you spend
  • On orders over €180, you may receive €0.375 for every €10 you spend

  

Who are Premium Brildor Members?


If over the last 12 months your purchases have exceeded €3,000, you will automatically be upgraded to the Premium Brildor Member category. This amount is checked daily. As soon as you reach it, you will become a Premium Member the day after.

 

Terms and conditions of the Brildor Club

  • Loyalty balance will be added when placing an order with an immediate payment method (Credit/debit card, Paypal and Pagantis).
  • Your balance will show in the "Your credit" section inside "Your account", and you can use it by selecting "Payment methods".
  • You can use your balance without needing to have a minimum accumulated amount or reach a minimum order value. Nonetheless, you won't be able to get a higher discount than your order value.
  • Balance expires after 6 months without making any purchase.
  • The balance is calculated on the net amount of the purchase: excluding taxes, shipping, coupons, and promotional discounts.
  • The cancellation of an order implies the loss of the balance generated in that purchase.
  • On a full-order return, the amount to be refunded will be the amount paid by the customer.
  • If the return of the order is due to causes beyond the control of Brildor, the redeemed balance won't be restored. However, the balance generated with this purchase won't be removed.
Sublimation Beer Stein - Frosted Glass - Pack of 2 units Description

More information about the frosted glass beer stein for sublimation

  • Spectacular and elegant mug, specially designed for drinking beer.
  • Dishwasher and microwave safe.
  • Slightly conical shape, almost imperceptible.
  • Solid base with star-shaped outer design.
  • Strong oversized handle, designed to comfortably place your thumb.
  • Printable with a Mug Press and a Sublimation Oven. It is also possible to sublimate this beer stein using a 3D Vacuum Heat Press.
  • With the 3D heat press, it is recommended to use a silicone mould like the one you can find in Related Products.
  • In Related Products, you may also find some accessories that will help you sublimate this mug using a sublimation oven: beer stein wraps, silicone sheets, and heat shrink bags.

DIMENSIONS (APPROX.)

Volume capacity
17 oz - 500 ml
Base Ø8 cm
Rim Ø7.2 cm
Height 15 cm
Thickness 3.34 mm
Handle 1.8 x 11 cm
Handle thickness 1.33 cm
Stein-handle distance 3 cm
Print area 22 x 14 cm

Recommended instructions and parameters for sublimation printing

In cold temperatures, it is recommended to preheat the jar with a hairdryer to avoid sudden temperature changes that could break the glass.

WITH A MUG HEAT PRESS

  • Print the design in mirror image.
  • Preheat the press to 180ºC.
  • Hold the paper's printed side against the mug and fix it with Heat Resistant Tape.
  • Place the beer stein upside down into the press, for the Mug Heater to cover all the area you want to sublimate. Make sure to centre the handle correctly.
  • Close the press at medium pressure for 300-400 seconds
  • Using a protective glove, remove the newly printed mug.
  • When cool, remove the paper carefully.

WITH A SUBLIMATION OVEN

  • Print the design in mirror image.
  • Preheat the oven to 200ºC.
  • Hold the paper's printed side against the stein and fix it with Heat Resistant Tape.
  • Adjust the wrap or the silicone sheet to the beer stein. If you are using a Heat Shrink Bag, insert the mug inside it and create a vacuum with a Heat Gun.
  • Sublimate inside the oven for 8 minutes.
  • Using a protective glove, remove the beer stein from the oven.
  • Remove the wrap, silicone sheet or the bag from the stein.
  • When cool, remove the paper carefully.

WITH A 3D VACUUM HEAT PRESS

  • Print the design in mirror image.
  • Preheat the 3D Oven to 200ºC.
  • Place the printed design around the stein and attach them with heat resistant tape.
  • Place the beer stein inside the mould and insert them into the oven. Connect the vacuum tube to the mould.
  • Sublimate inside the oven for 8 minutes.
  • Using a protective glove, remove the beer stein from the oven.
  • Remove it from the mould.
  • When cool, remove the paper carefully.
Additional Information
Reference nº 004 050
Net Weight (kg) 0.755
Gross Weight (kg) 0.0740
Billable Weight 0.8305
Dimensions (mm) Ø80 mm x 150 mm de alto
Print area (mm) 200 x 110
Colour Transparent
Surface material Crystal
Items Jars/Beer Mugs
Marking techniques Sublimation
Post your question

Questions and Answers

There are no entries.

Sublimation Beer Stein - Frosted Glass - Pack of 2 units Description

More information about the frosted glass beer stein for sublimation

  • Spectacular and elegant mug, specially designed for drinking beer.
  • Dishwasher and microwave safe.
  • Slightly conical shape, almost imperceptible.
  • Solid base with star-shaped outer design.
  • Strong oversized handle, designed to comfortably place your thumb.
  • Printable with a Mug Press and a Sublimation Oven. It is also possible to sublimate this beer stein using a 3D Vacuum Heat Press.
  • With the 3D heat press, it is recommended to use a silicone mould like the one you can find in Related Products.
  • In Related Products, you may also find some accessories that will help you sublimate this mug using a sublimation oven: beer stein wraps, silicone sheets, and heat shrink bags.

DIMENSIONS (APPROX.)

Volume capacity
17 oz - 500 ml
Base Ø8 cm
Rim Ø7.2 cm
Height 15 cm
Thickness 3.34 mm
Handle 1.8 x 11 cm
Handle thickness 1.33 cm
Stein-handle distance 3 cm
Print area 22 x 14 cm

Recommended instructions and parameters for sublimation printing

In cold temperatures, it is recommended to preheat the jar with a hairdryer to avoid sudden temperature changes that could break the glass.

WITH A MUG HEAT PRESS

  • Print the design in mirror image.
  • Preheat the press to 180ºC.
  • Hold the paper's printed side against the mug and fix it with Heat Resistant Tape.
  • Place the beer stein upside down into the press, for the Mug Heater to cover all the area you want to sublimate. Make sure to centre the handle correctly.
  • Close the press at medium pressure for 300-400 seconds
  • Using a protective glove, remove the newly printed mug.
  • When cool, remove the paper carefully.

WITH A SUBLIMATION OVEN

  • Print the design in mirror image.
  • Preheat the oven to 200ºC.
  • Hold the paper's printed side against the stein and fix it with Heat Resistant Tape.
  • Adjust the wrap or the silicone sheet to the beer stein. If you are using a Heat Shrink Bag, insert the mug inside it and create a vacuum with a Heat Gun.
  • Sublimate inside the oven for 8 minutes.
  • Using a protective glove, remove the beer stein from the oven.
  • Remove the wrap, silicone sheet or the bag from the stein.
  • When cool, remove the paper carefully.

WITH A 3D VACUUM HEAT PRESS

  • Print the design in mirror image.
  • Preheat the 3D Oven to 200ºC.
  • Place the printed design around the stein and attach them with heat resistant tape.
  • Place the beer stein inside the mould and insert them into the oven. Connect the vacuum tube to the mould.
  • Sublimate inside the oven for 8 minutes.
  • Using a protective glove, remove the beer stein from the oven.
  • Remove it from the mould.
  • When cool, remove the paper carefully.

Additional Information

Reference nº 004 050
Net Weight (kg) 0.755
Gross Weight (kg) 0.0740
Billable Weight 0.8305
Dimensions (mm) Ø80 mm x 150 mm de alto
Print area (mm) 200 x 110
Colour Transparent
Surface material Crystal
Items Jars/Beer Mugs
Marking techniques Sublimation
Post your question

Questions and Answers

There are no entries.

The legal stuff about cookies:


This message requires us to tell you about ourcookie policy.

If you continue browsing, we'll assume you accept it and think it's okay.

Don't worry, this message only comes up once.