More information about the sublimation carved ceramic beer steins

INDEX

> Description

> Things to keep in mind

> Dimensions (approx.)

> Recommended instructions and parameters for sublimation printing

> Related posts

DESCRIPTION

• Wide "D" handle for a firm and secure grip
• Decoration on the top edge, base and sides of the handle. With dots and embossed leaf motifs
• 2 models: white with gold trim and grey with blue accents
• Reinforced flared base
• Can be personalised with a sublimation oven using wraps, silicone sheets or heat shrink bags
• In Related Products, you will find boxes suitable for these tankards

THINGS TO KEEP IN MIND

• We recommend personalisation on the smooth cylindrical central part for good printing results
• Before personalising the grey stein, note that the colour will blend in with the colours of the image you want to sublimate. One way to minimise this effect is choosing dark colours or using alternative techniques to sublimation
• Although the grey mug (Ref. 040604) is dishwasher safe, hand wash is recommended
• Orca certification sticker on the base. Easily removable if desired

DIMENSIONS (APPROX.)

RECOMMENDED INSTRUCTIONS AND PARAMETERS FOR SUBLIMATION PRINTING

• Print the design in mirror image
• Preheat the oven to 180ºC
• Hold the paper's printed side against the stein and fix it with heat-resistant tape
• Adjust the wrap or place the stein in a heat shrink bag and shrink it with a heat gun. Make sure you get rid of all the wrinkles. You can also use a silicone sheet
• Sublimate in the oven for 13-15 minutes
• Using a protective glove, remove the wrap, the silicone sheet, or the bag, depending on the accessory you used
• Carefully remove the paper from the stein

RELATED POSTS

Oven Sublimation Using Heat Shrink Bags