Sublimation Mason Jar with lid & straw - Frosted Glass
Customisable 12 oz jar for sublimation.
- Made of frosted glass with a matte finish
- Includes a screw-on metal lid and plastic straw
- Customisable area: 22.5 x 9.5 cm
More information about the frosted glass mason jar with lid and straw for sublimation
INDEX
> Recommended sublimation instructions and parameters
DESCRIPTION
- Ideal for enjoying a delicious smoothie or serving milkshakes, cocktails, infusions, slushies or any drink in restaurants, pubs, parties, weddings...
- Freezer effect, perfect for serving cold drinks in summer
- Jar with handle, similar to a mason jar. Classic and practical design with a screw-on metal lid and a hole for the straw. Includes a rigid white plastic straw
- Prevents any liquid from spilling onto the table
- Coated with a layer of varnish for high-quality prints
- Comes in a white cardboard box
THINGS TO KEEP IN MIND
- Hand wash recommended
TIPS AND ADVICE
- Decorate the lid by painting it, adding a phrase, covering it with fabric or decorative paper, etc.
- Use transfer paper to add designs to the lid and combine them with coloured straws
MEASUREMENTS
| Capacity (oz ≈ ml) | 12 ≈ 350 |
| Straw hole (mm) | 7 |
| Straw (cm) | 0.7 x 19.2 |
| Jar mouth (cm) | Ø6.7 |
| Base (cm) | Ø7.4 |
| Height (cm) | 13 |
| Thickness (mm) | 4 |
| Handle (cm) | 1.5 x 7.9 |
| Jar-handle distance (cm) | 2.7 |
| Customisation area (cm) | 22.5 x 9.5 |
| Packing (cm) | 13 x 12 x 9 |
| Weight (g) |
371 |
RECOMMENDED SUBLIMATION INSTRUCTIONS AND PARAMETERS
Parameters provided for guidance only. It is recommended to carry out preliminary tests to make the necessary adjustments before starting production.
WITH MUG PRESS
- Print the design in mirror mode
- Heat the press to 180 ºC
- Place the paper with the printed side onto the jar and fix it with heat-resistant adhesive tape
- Close the press with medium-high pressure for 200 seconds
- With the help of a protective glove, remove the freshly sublimated jar
- Carefully remove the paper
WITH SUBLIMATION OVEN
- Print the design in mirror mode
- Heat the oven to 200 ºC
- Place the printed design in mirror mode around the jar and fix it using heat-resistant adhesive tape
- Adjust the clamp, or place the jar inside a shrink bag and heat with a heat gun, avoiding the formation of wrinkles. You can also use a silicone sheet
- Sublimate in the oven for 8 minutes
- With the help of a protective glove, remove the clamp, the silicone sheet or the bag, as appropriate
- Carefully remove the paper from the jar
| Ref. | 035246 |
|---|---|
| Print area (mm) | 225 x 95 |
| Thickness (mm) | 4 |
| Surface material | Glass |
| Items | Jars/Beer Mugs |
| Marking techniques | Dye sublimation |
| Height (cm) | 14.5 |
| Width (cm) | 15.0 |
| Length (cm) | 7.8 |
| Gross weight (kg) | 420 |
Reviews
Share your opinion
It will only take a minute, and your opinion can help other customers.
Ana
Verified Buyer
22 Oct 2024
From Brildor Spanish
Questions
No questions found for this product.
Be the first to ask a question!