Elegant and minimalist, ideal for promotional events and celebrations such as weddings, christenings, stag and hen parties, etc.
Also perfect as a souvenir
Original design with flared lip and cylindrical body (excluding the lip). The surface is completely smooth
White in colour. The porcelain mug has a beige tone and the ceramic mug has a more greyish appearance
Customisable over the entire outer surface
Ceramic mug Ref. 032151, thicker material. With ring-shaped handle and rounded base
Mug Ref. 032486 made of porcelain, a finer and lighter material. Loop-shaped handle and flat base
Both have Orca certification. The porcelain mug has the seal printed on the base and the ceramic mug has it attached as a sticker
Good image definition. The white of the mug does not affect the colour tones during sublimation
Customisable with a mug heat press using 10 oz elements and with a sublimation oven
We offer presentation and individual packaging boxes for mugs, which you can find in the Related Products
THINGS TO KEEP IN MIND
Due to the curvature of the upper rim of the mug, it is recommended that the design has a margin of 10 mm to prevent the image from blurring
MEASUREMENTS
Reference
032151
032486
Material
Ceramic
Porcelain
Capacity (oz ≈ ml)
10 ≈ 295
10 ≈ 295
Print area (cm)
20.5 x 9.5
20.5 x 9.5
Inner diameter (cm)
Ø6.5
Ø6.6
Outer diameter (cm)
Ø7.7
Ø7.4
Height (cm)
10.7
10.3
Thickness (mm)
3
2.5
Handle (cm)
1.1 x 5.5
1.1 x 8.5
Mug-handle distance (cm)
2.5
3
Weight (g)
283
194
RECOMMENDED SUBLIMATION INSTRUCTIONS AND PARAMETERS
The parameters provided are for guidance only. They may vary due to factors such as the paper used, inks or ambient temperature. For this reason, we recommend carrying out tests.
WITH HEAT PRESS
Print the design in mirror mode
Heat the press to 200 ºC
Place the paper with the printed side onto the mug and secure it with heat-resistant tape
Close the press with medium-high pressure for 180 seconds
Remove the freshly printed mug using a protective glove
Carefully remove the paper
WITH OVEN
Print the design in mirror mode
Preheat the oven to 180 ºC
Place the paper with the printed side around the mug and secure it with heat-resistant tape
Fit the clamp, or place the mug inside a shrink bag and heat with a heat gun, avoiding wrinkles. You can also use a silicone sheet
Place the mug in the oven for 13-5 minutes
Remove the clamp, silicone sheet or shrink bag, as appropriate, using a protective glove
It will only take a minute, and your opinion can help other customers.
Log in to your profile, share your opinion, and enter the monthly "Rate & Win" prize draw
0
reviews
5
0
4
0
3
0
2
0
1
0
Questions
No questions found for this product.
Be the first to ask a question!
https://www.brildor.com/en/sublimation-tall-mug-flared-lipen_28181Sublimation Tall Mug - Flared Lip<p><a name="know-more"></a></p>
<h2>More information about the flared lip tall sublimation mug</h2>
<p> </p>
<p><strong>INDEX</strong></p>
<p>> <a href="#know-more1">Description</a></p>
<p>> <a href="#know-more2">Things to keep in mind</a></p>
<p>> <a href="#know-more3">Measurements</a></p>
<p>> <a href="#know-more5">Recommended sublimation instructions and parameters</a></p>
<p>> <a href="#know-more6">Related posts</a></p>
<p> </p>
<p><a name="know-more1"></a></p>
<p><strong>DESCRIPTION</strong></p>
<ul>
<li>Elegant and minimalist, ideal for promotional events and celebrations such as weddings, christenings, stag and hen parties, etc.</li>
<li>Also perfect as a souvenir</li>
<li>Original design with flared lip and cylindrical body (excluding the lip). The surface is completely smooth</li>
<li>White in colour. The porcelain mug has a beige tone and the ceramic mug has a more greyish appearance</li>
<li>Customisable over the entire outer surface</li>
<li>Ceramic mug Ref. 032151, thicker material. With ring-shaped handle and rounded base</li>
<li>Mug Ref. 032486 made of porcelain, a finer and lighter material. Loop-shaped handle and flat base</li>
<li>Both have Orca certification. The porcelain mug has the seal printed on the base and the ceramic mug has it attached as a sticker</li>
<li>Good image definition. The white of the mug does not affect the colour tones during sublimation</li>
<li>Customisable with a mug heat press using <span class="azul-negrita">10 oz</span> elements and with a sublimation oven</li>
<li>We offer presentation and individual packaging boxes for mugs, which you can find in the <strong>Related Products</strong></li>
</ul>
<p> </p>
<p><a name="know-more2"></a></p>
<p><strong>THINGS TO KEEP IN MIND</strong></p>
<ul>
<li>Due to the curvature of the upper rim of the mug, it is recommended that the design has a margin of <span class="azul-negrita">10 mm</span> to prevent the image from blurring</li>
</ul>
<p> </p>
<p><a name="know-more3"></a></p>
<p><strong>MEASUREMENTS</strong></p>
<table>
<tbody>
<tr>
<td><strong>Reference</strong></td>
<td style="text-align: center;"><strong>032151</strong></td>
<td style="text-align: center;"><strong>032486</strong></td>
</tr>
<tr>
<td><strong>Material</strong></td>
<td style="text-align: center;">Ceramic</td>
<td style="text-align: center;">Porcelain</td>
</tr>
<tr>
<td><strong>Capacity (oz ≈ ml)</strong></td>
<td class="azul-negrita" style="text-align: center;"><span class="azul-negrita">10 ≈ 295</span></td>
<td class="azul-negrita" style="text-align: center;"><span class="azul-negrita">10 ≈ 295</span></td>
</tr>
<tr>
<td><strong>Print area (cm)</strong></td>
<td style="text-align: center;"><span class="azul-negrita">20.5 x 9.5</span></td>
<td style="text-align: center;"><span class="azul-negrita">20.5 x 9.5</span></td>
</tr>
<tr>
<td><strong>Inner diameter (cm)</strong></td>
<td class="azul-negrita" style="text-align: center;">Ø6.5</td>
<td class="azul-negrita" style="text-align: center;">Ø6.6</td>
</tr>
<tr>
<td><strong>Outer diameter (cm)</strong></td>
<td class="azul-negrita" style="text-align: center;">Ø7.7</td>
<td class="azul-negrita" style="text-align: center;">Ø7.4</td>
</tr>
<tr>
<td><strong>Height (cm)</strong></td>
<td class="azul-negrita" style="text-align: center;">10.7</td>
<td class="azul-negrita" style="text-align: center;">10.3</td>
</tr>
<tr>
<td><strong>Thickness (mm)</strong></td>
<td class="azul-negrita" style="text-align: center;">3</td>
<td class="azul-negrita" style="text-align: center;">2.5</td>
</tr>
<tr>
<td><strong>Handle (cm)</strong></td>
<td class="azul-negrita" style="text-align: center;">1.1 x 5.5</td>
<td class="azul-negrita" style="text-align: center;">1.1 x 8.5</td>
</tr>
<tr>
<td><strong>Mug-handle distance (cm)</strong></td>
<td class="azul-negrita" style="text-align: center;">2.5</td>
<td class="azul-negrita" style="text-align: center;">3</td>
</tr>
<tr>
<td><strong>Weight (g)</strong></td>
<td class="azul-negrita" style="text-align: center;">283</td>
<td class="azul-negrita" style="text-align: center;">194</td>
</tr>
</tbody>
</table>
<p> </p>
<p><a name="know-more5"></a></p>
<p><strong>RECOMMENDED SUBLIMATION INSTRUCTIONS AND PARAMETERS</strong></p>
<p>The parameters provided are for guidance only. They may vary due to factors such as the paper used, inks or ambient temperature. For this reason, we recommend carrying out tests.</p>
<p><strong>WITH HEAT PRESS</strong></p>
<ul>
<li>Print the design in <strong>mirror mode</strong></li>
<li>Heat the press to <span class="azul-negrita">200 ºC</span></li>
<li>Place the paper with the printed side onto the mug and secure it with heat-resistant tape</li>
<li>Close the press with <strong>medium-high pressure</strong> for <span class="azul-negrita">180 seconds</span></li>
<li>Remove the freshly printed mug using a protective glove</li>
<li>Carefully remove the paper</li>
</ul>
<p><strong>WITH OVEN</strong></p>
<ul>
<li>Print the design in <strong>mirror mode</strong></li>
<li>Preheat the oven to <span class="azul-negrita">180 ºC</span></li>
<li>Place the paper with the printed side around the mug and secure it with heat-resistant tape</li>
<li>Fit the clamp, or place the mug inside a shrink bag and heat with a heat gun, avoiding wrinkles. You can also use a silicone sheet</li>
<li>Place the mug in the oven for <span class="azul-negrita">13-5 minutes</span></li>
<li>Remove the clamp, silicone sheet or shrink bag, as appropriate, using a protective glove</li>
<li>Carefully remove the paper from the mug</li>
</ul>
<p> </p>
<p><a name="know-more6"></a></p>
<p><strong>RELATED POSTS</strong></p>
<p><a href="https://www.brildor.com/blog/en/how-to-print-on-perfect-and-original-mugs/" target="_blank" rel="noopener">How To Print Perfect And Original Mugs</a></p>
<p><a href="https://www.brildor.com/blog/en/tips-for-starting-to-print-ceramic-mugs-with-sublimation/" target="_blank" rel="noopener">Tips for starting to print ceramic mugs with sublimation</a></p>
<p><a href="https://www.brildor.com/blog/en/what-are-the-differences-in-the-quality-of-sublimation-mugs/" target="_blank" rel="noopener">What are the differences in the quality of sublimation mugs?</a></p>https://www.brildor.com/media/catalog/product/t/a/taza-alta-para-sublimacion-con-borde-curvo-d1.jpg3.95instock03.95000https://www.brildor.com/media/catalog/product/t/a/taza-alta-para-sublimacion-con-borde-curvo-d1.jpgen_15698en_15985en_19185en_20075en_22567en_23946en_25505en_25688en_25871en_28022en_28177en_32214/BLANKS/BLANKS/MUGS/BLANKS/MUGS/White2021-07-24T06:00:18+0000
