More information about the Sublimable Bevelled Glass Photo Panels

INDEX

> Description

> Dimensions

> Recommended Sublimation Instructions and Parameters

DESCRIPTION

• Can be placed on surfaces horizontally or vertically
• Screw-type stand made of white plastic with decorative diamond. The 23 x 28 cm photo panel has 4 holes to place 2 stands and 2 decorative plugs
• Bevelled corners on the back of the photo panel
• Back with sublimable coating for direct printing. The front will display the image with a volume effect
• Comes in a white box with a window
• You can find metal stands for the photo panels in Related Products

DIMENSIONS

RECOMMENDED SUBLIMATION INSTRUCTIONS AND PARAMETERS

Parameters indicated are for guidance only. It is recommended to conduct preliminary tests to make necessary adjustments before starting production.

WITH FLAT TRANSFER PRESS - DIRECT METHOD

• Print the design in direct mode
• Heat the press to 180 ºC
• Secure the printed paper onto the white side of the photo panel with thermal tape
• Place the photo panel and paper with the sublimable side facing up on the press plate
• Place the silicone pad over the photo panel for even printing (optional)
• Close the press with medium pressure for 80-90 seconds
• Using a protective glove, remove the freshly printed photo panel
• Carefully remove the paper

WITH FLAT TRANSFER PRESS - INDIRECT METHOD

• Print the design in direct mode
• Heat the press to 200 ºC
• Place the Nomex pad on the lower plate of the press for even heat distribution
• Secure the printed paper onto the white side of the photo panel with thermal tape
• Place the photo panel and paper with the sublimable side facing down on the press plate
• Close the press with medium pressure for 240 seconds
• Using a protective glove, remove the freshly printed photo panel
• Carefully remove the paper