The store will not work correctly in the case when cookies are disabled.
The legal stuff about cookies:
This message requires us to tell you about our
If you continue browsing, we'll assume you accept it and think it's okay.
Don't worry, this message only comes up once.
A Nomex pad to protect the lower plate of heat press machines. Ensures uniform transfers and allows better contact between the design on the printed paper and the area to print, particularly on the edges.
Made of Nomex, a highly heat-resistant material.
1 cm. Sale unit: pre-cut sheets and per linear metre with a width of
Our availability is not enough?
Let us know how much you need
More information about the Nomex felt pad
Excellent for the sublimation of tiles, photo frames, trays, plates etc...
Allows better sublimation of porcelain or glass items.
Placed on the lower plate of the press, it helps heat to be evenly distributed.
Perfect for personalising items with irregular or bevelled edges.
Minimises wear and tear on the press' lower plate caused by the continuous placement of rigid items such as ceramic tiles or photo slates.
Approximately 30% of its thickness and sponginess may be lost during the first transfers. However, it is still appropriate for the recommended uses.
INSTRUCTIONS OF USE IN SUBLIMATION PRINTING
Place the pad on the press' lower plate.
Put the printed paper with the design on the pad.
Position the item on the paper so that its print area is in direct contact with the design.
It is recommended to place a Teflon sheet on the object to protect the press' upper plate.
Close the heat press and start the sublimation process according to the recommended temperature and time parameters for the item.