More information about LokLik Holographic Self Adhesive Cutting Vinyl

INDEX

> Description

> Things to keep in mind

> Application instructions

> Technical specifications

> Safety data sheet

> Storage recommendations

DESCRIPTION

• Easy to use. Cut with a plotter, weed, and manually adhere to the surface
• Extra-strong adhesive with a rain-resistant layer
• Uniform and bubble-free application on curved surfaces. Ideal for application on car windows, ceramics, bottles, mugs, glasses...
• Coated with a protective transparent film, making it more durable and resistant to fading, scratches, and water
• Durability of up to 5 years indoors and 3 years outdoors
• Cardboard core or inner tube of Ø2 cm

THINGS TO KEEP IN MIND

• Not suitable for application on walls or textiles
• For complex or detailed designs, it may be advisable to use a transfer tape

APPLICATION INSTRUCTIONS

1. Remove the protective transparent film from the vinyl before cutting
2. The surface where the vinyl is applied must be clean and dry
3. Cut the vinyl into the shape of the design in direct mode
4. Weed the vinyl, discarding the excess parts. Only the design to be transferred will remain on the liner
5. Cover it with transfer paper until adhered, then remove the liner
6. Transfer the design to the target surface. Adhere it gradually, using a squeegee while removing the transfer tape
   

TECHNICAL SPECIFICATIONS

Information provided by the manufacturer for guidance purposes. It is recommended to conduct preliminary tests.

SAFETY DATA SHEET

LokLik Holographic Adhesive Vinyl (.pdf - 0.35 MB)

STORAGE RECOMMENDATIONS

• Store in well-ventilated areas, with low humidity and no direct sunlight exposure