More information about the LokLik Matte and Glossy Cut Adhesive Vinyl

INDEX

> Description

> Things to keep in mind

> Application instructions

> Technical specifications

> Safety data sheet

> Storage recommendations

DESCRIPTION

• Can be cut with a plotter or scissors, weeded, and manually adhered to the surface
• Extra-strong adhesive, weather-resistant and waterproof
• Uniform application without bubbles
• Durability up to 5 years indoors and 3 years outdoors
• Cardboard core or inner tube of Ø2 cm
• Packaged in a cardboard box

THINGS TO KEEP IN MIND

• Not suitable for application on walls or textiles
• For complex or detailed designs, using a transfer tape may be advisable (see Related Products)

APPLICATION INSTRUCTIONS

Cutting parameters should be set according to the plotter manufacturer's guidelines.

1. Remove the clear protective film from the vinyl before cutting
2. The surface where the vinyl is applied must be clean and dry
3. Cut the vinyl in the shape of the design in direct mode
4. Weed the vinyl, discarding the excess parts. Only the design to be transferred will remain on the liner
5. Cover it with transfer paper until adhered and remove the liner
6. Transfer the design to the target surface. Adhere it gradually, using a squeegee while removing the transfer tape
   

TECHNICAL SPECIFICATIONS

Information provided by the manufacturer for guidance purposes. It is recommended to conduct preliminary tests.

SAFETY DATA SHEET

Matte Adhesive Vinyl LokLik (.pdf - 0.37 MB)

Gloss Adhesive Vinyl LokLik (.pdf - 0.37 MB)

STORAGE RECOMMENDATIONS

• Store in well-ventilated areas, with low humidity and without direct sunlight exposure