More information about the LokLik Metallic Mirror Adhesive Vinyl

INDEX

> Description

> Things to keep in mind

> Application instructions

> Technical specifications

> Safety data sheet

> Storage recommendations

DESCRIPTION

• Can be cut with a plotter or scissors, weeded, and manually adhered to the surface
• Extra-strong adhesive, outdoor-resistant and waterproof
• Uniform, bubble-free application on curved surfaces
• Covered with a protective transparent film, making it more durable and resistant to fading, scratches, and water
• Durability up to 5 years indoors and 3 years outdoors
• Cardboard core or inner tube of Ø2 cm

THINGS TO KEEP IN MIND

• Not suitable for application on walls or textiles
• For composite designs or those with details, it may be useful to use a transfer tape (see Related Products)

APPLICATION INSTRUCTIONS

1. Remove the transparent protective film from the vinyl before cutting
2. The surface where the vinyl is applied must be clean and dry
3. Cut the vinyl in the shape of the design in direct mode
4. Weed the vinyl, discarding the excess parts. Only the design to be transferred will remain on the liner
5. Cover it with transfer paper until adhered and remove the liner
6. Transfer the design to the destination surface. Adhere it gradually, using a squeegee while removing the transfer paper
   

TECHNICAL SPECIFICATIONS

Information provided by the manufacturer for guidance purposes. It is recommended to conduct prior tests.

SAFETY DATA SHEET

Metallic Adhesive Vinyl LokLik (.pdf - 0.35 MB)

STORAGE RECOMMENDATIONS

• Store in well-ventilated areas, with low humidity and no direct exposure to sunlight