More information about the LokLik Adhesive Vinyl Sample Book

INDEX

> Description

> Things to keep in mind

> What does the pack include?

> Application instructions

> Technical specifications

> Safety data sheets

> Storage recommendations

DESCRIPTION

• Designed to check each colour and finish before applying it to designs
• Covered with a transparent protective film and extra-strong adhesive with a waterproof layer
• Easy to use: Cut with a plotter or scissors, weed and manually adhere to the surface
• Vinyls with durability of up to 5 years indoors and 3 years outdoors
• PVC carrier with light adhesive. Transparent with a red grid to facilitate design alignment
• The adhesive leaves no residue. It can be removed effortlessly without damaging the vinyl or the surface
• Presented in a plastic folder

THINGS TO KEEP IN MIND

• Not suitable for application on rough surfaces, walls, or textiles

WHAT DOES THE PACK INCLUDE?

• Matte (18 colours): fuchsia, pink, red, orange, lemon yellow, apple green, green, teal, tiffany blue, blue, royal blue, purple, lilac, black, dark brown, beige, light grey, white
• Gloss (4 colours): black, white, gold, silver
• Metallic or mirror (3 colours): gold, silver, rose gold
• Holographic (4 colours): iridescent silver, pink, aqua blue, bluish violet
• Carrier (1 sheet): transparent with a red grid

TECHNICAL SPECIFICATIONS

Information provided by the manufacturer as guidance only. It is recommended to carry out preliminary tests.

SAFETY DATA SHEETS

Matte Adhesive Vinyl LokLik (.pdf - 0.37 MB)

Gloss Adhesive Vinyl LokLik (.pdf - 0.37 MB)

Metallic Adhesive Vinyl LokLik (.pdf - 0.35 MB)

Holographic Adhesive Vinyl LokLik (.pdf - 0.35 MB)

LokLik Carrier (.pdf - 0.36 MB)

APPLICATION INSTRUCTIONS

1. Remove the transparent protective film from the vinyl before cutting
2. The surface where the vinyl is applied must be clean and dry
3. Cut the vinyl into the shape of the design in direct mode
4. Weed the vinyl, discarding the excess parts. Only the design to be transferred will remain on the liner
5. Cover it with transfer paper until adhered and remove the liner
6. Transfer the design to the target surface. Adhere it gradually using a squeegee while removing the transfer paper
   

STORAGE RECOMMENDATIONS

• Store in well-ventilated areas, with low humidity and without direct exposure to sunlight