More information about the ColourShift Aslan SE 71 holographic self-adhesive cut vinyl

INDEX

> Description

> Things to keep in mind

> Technical details

> Colours reflected by each vinyl

> Storage recommendations

> Colour card

> Data sheet

DESCRIPTION

ColourShift Aslan SE 71 is a holographic polyester film for lettering flat, non-curved rigid surfaces with multicoloured designs.

• Easy to apply. To be cut with a plotter, weeded and manually adhered to the surface
• Opaque and coloured on both sides. When applied on transparent surfaces, the vinyl effect is equal on both sides and does not let light through
• Dry or wet application
• PVC free
• The 25-metre rolls have a Ø7.5 cm cardboard core
• Made in Germany by Aslan

THINGS TO KEEP IN MIND

• For complex or detailed designs, it may be convenient to use application tape, see Related Products
• Use a squeegee to adhere it to the surface and avoid air bubbles
• If applied wet, the adhesive may whiten, but this will disappear after a few days
• Not suitable for non-tempered glass
• The substrate must be clean, free of dust, grease or lint
• Does not adhere to curved surfaces such as bottles or glasses

TECHNICAL DETAILS

COLOURS REFLECTED BY EACH VINYL

STORAGE RECOMMENDATIONS

• Store in an upright position or on a roll holder
• Store in a place at -40ºC to 60ºC and a relative humidity of 50- 60%
• Can be stored for up to 2 years if recommendations are followed

COLOUR CARD

Colour card Aslan ColourShift SE71 (pdf - 3.87 MB)

DATA SHEET

Data sheet Aslan ColourShift SE71 (.pdf - 0.21 MB)