Loading..

Product was successfully added to your shopping cart.

Button Badges - Ø32mm

Button Badges - Ø32mm

  • Button Badges - Ø32mm - Personalised
  • Button Badges - Ø32mm - Components - Pin
  • Button Badges - Ø32mm - Components - Magnet

Button Badges - Ø32mm

Round metal badges you can personalise with our assembly machines and the Ø32 mm round mould. Available in the following models:

  • Pin
  • Magnet

Components of the Ø32 mm button badge models.

How to personalise these badges?

+ Read More
- Read Less
Availability: Shown on each product
  • Immediate:

Product Name Price Availability Qty
Pin Badges - Ø32mm - Bag of 20 units
Pin Badges - Ø32mm - Bag of 20 units
Ref. 035411
€3.65
  • 20 for €2.99 each
  • Immediate: 22 units
Pin Badges - Ø32mm - Bag of 200 units
Pin Badges - Ø32mm - Bag of 200 units
Ref. 028641
€18.25
  • 5 for €15.50 each
  • 10 for €12.75 each
  • 50 for €10.99 each
  • Immediate: 0 units

Out of stock

Magnet Badges - Ø32mm - Bag of 20 units
Magnet Badges - Ø32mm - Bag of 20 units
Ref. 035416
€5.80
  • Immediate: 70 units
Magnet Badges - Ø32mm - Bag of 200 units
Magnet Badges - Ø32mm - Bag of 200 units
Ref. 032721
€29.90
  • 5 for €26.95 each
  • 10 for €23.95 each
  • Immediate: 4 units
Round Mould for badge making machines - Ø32mm
Round Mould for badge making machines - Ø32mm
Ref. 028636
€74.90
  • 3 for €54.90 each
  • Immediate: 0 units

Out of stock

VAT not included
Get free € to redeem on your next order by buying these products. Discover the Brildor Loyalty Program

Brildor Club is a direct discount program for your purchases. Whenever you place an order (minimum purchase of €10), some discount balance will be generated into your customer account for you to use on your next purchase. The more you buy, the more you save.
You will get access to the Brildor Club as soon as you register as a new customer, and will receive a €5 welcome balance.

 

How do I get some discount balance?


As a Regular Brildor Member:

  • On orders up to €180, you may receive €0.20 for every €10 you spend
  • On orders over €180, you may receive €0.30 for every €10 you spend
  • We will give you an extra €10 if you make 10 purchases over €100


As a Premium Brildor Member:

If you are a Premium Member of the Brildor Club, you will accumulate 25% more balance, so you can obtain:

  • On orders up to €180, you may receive €0.25 for every €10 you spend
  • On orders over €180, you may receive €0.375 for every €10 you spend

  

Who are Premium Brildor Members?


If over the last 12 months your purchases have exceeded €3,000, you will automatically be upgraded to the Premium Brildor Member category. This amount is checked daily. As soon as you reach it, you will become a Premium Member the day after.

 

Terms and conditions of the Brildor Club

  • Loyalty balance will be added when placing an order with an immediate payment method (Credit/debit card, Paypal and Pagantis).
  • Your balance will show in the "Your credit" section inside "Your account", and you can use it by selecting "Payment methods".
  • You can use your balance without needing to have a minimum accumulated amount or reach a minimum order value. Nonetheless, you won't be able to get a higher discount than your order value.
  • Balance expires after 6 months without making any purchase.
  • The balance is calculated on the net amount of the purchase: excluding taxes, shipping, coupons, and promotional discounts.
  • The cancellation of an order implies the loss of the balance generated in that purchase.
  • On a full-order return, the amount to be refunded will be the amount paid by the customer.
  • If the return of the order is due to causes beyond the control of Brildor, the redeemed balance won't be restored. However, the balance generated with this purchase won't be removed.
Button Badges - Ø32mm Description

Components of each Ø32 mm button badge model

PIN - REF. 035411 & 028641

The badge includes a safety pin to attach it to clothing. Sale unit: 20 and 200-badge bags.

  • 1 protective plastic film (Mylar).
  • 1 metal plate to personalise (front).
  • 1 metal plate with a pin (back).

MAGNET - REF. 035416 & 032721

The badge includes a magnet that allows it to stick to any metal surface. Sale unit: 20 and 200-badge bags.

  • 1 protective plastic film (Mylar).
  • 1 metal plate to personalise (front).
  • 1 circular and flexible black magnet circular negro y flexible, with an adhesive on its back.
  • 1 metal plate on which the magnet has to be pasted (back).

How to personalise Ø32 mm button badges?

STEP 1: PRINT THE DESIGN

  • Design the motif that you want to place on the badge. Use images, photos, logos... and a lot of creativity.
  • Prepare a template according to the size and shape of the badge. Remember that the template must have an additional border, on the outside, to fold and attach the design to the back of the badge.
  • Print your design on paper, with your usual printer. It is recommended to use paper sheets with a 100-110 g/m2 thickness. You can personalise badges with other materials like fabric or vinyl but, for an easier explanation, we will suppose you will be using paper.

Download the template to help you print your button badges in eps, psd or pdf format.

STEP 2: TRIM THE DESIGN

  • Cut the printed paper on the outermost edge. You may use scissors or a utility knife (cutter). It is convenient to use a die cutting machine or a plotter to be able to cut several designs at the same time. It will help you gain precision and speed, achieving a straight, clean, and homogeneous cut. (see in Related Products).

STEP 3: ASSEMBLE THE BADGES

  • Prepare the badge making machine. For this example, we will suppose you are using a manual one. If you own a pneumatic machine, the steps are very similar.
  • Set up the Ø32 mm round mould.
  • Place the front of the badge on the mould's Part A, with the sharp metal edge down.
  • On this plate, place the design that you previously trimmed, and cover it with the protective plastic film.
  • Rotate the base until the Upper Part aligns with Part A.
  • Hold the machine with one hand and push the lever down with the other one. Apply pressure and pull the lever up. The front plate will remain on the upper mould.
  • Place the back of the badge on Part B, with the sharp metal edge up. Try to align the plate with the positioning pin to ensure its correct orientation.
  • Rotate the base of the machine until the Upper Part aligns with Part B.
  • Hold the machine with one hand and push the lever down with the other one. Apply pressure and pull it back up.
  • Rotate the base of the machine again and remove the badge.

Additional Information
Reference nº 925 366
Post your question

Questions and Answers

There are no entries.

Button Badges - Ø32mm Description

Components of each Ø32 mm button badge model

PIN - REF. 035411 & 028641

The badge includes a safety pin to attach it to clothing. Sale unit: 20 and 200-badge bags.

  • 1 protective plastic film (Mylar).
  • 1 metal plate to personalise (front).
  • 1 metal plate with a pin (back).

MAGNET - REF. 035416 & 032721

The badge includes a magnet that allows it to stick to any metal surface. Sale unit: 20 and 200-badge bags.

  • 1 protective plastic film (Mylar).
  • 1 metal plate to personalise (front).
  • 1 circular and flexible black magnet circular negro y flexible, with an adhesive on its back.
  • 1 metal plate on which the magnet has to be pasted (back).

How to personalise Ø32 mm button badges?

STEP 1: PRINT THE DESIGN

  • Design the motif that you want to place on the badge. Use images, photos, logos... and a lot of creativity.
  • Prepare a template according to the size and shape of the badge. Remember that the template must have an additional border, on the outside, to fold and attach the design to the back of the badge.
  • Print your design on paper, with your usual printer. It is recommended to use paper sheets with a 100-110 g/m2 thickness. You can personalise badges with other materials like fabric or vinyl but, for an easier explanation, we will suppose you will be using paper.

Download the template to help you print your button badges in eps, psd or pdf format.

STEP 2: TRIM THE DESIGN

  • Cut the printed paper on the outermost edge. You may use scissors or a utility knife (cutter). It is convenient to use a die cutting machine or a plotter to be able to cut several designs at the same time. It will help you gain precision and speed, achieving a straight, clean, and homogeneous cut. (see in Related Products).

STEP 3: ASSEMBLE THE BADGES

  • Prepare the badge making machine. For this example, we will suppose you are using a manual one. If you own a pneumatic machine, the steps are very similar.
  • Set up the Ø32 mm round mould.
  • Place the front of the badge on the mould's Part A, with the sharp metal edge down.
  • On this plate, place the design that you previously trimmed, and cover it with the protective plastic film.
  • Rotate the base until the Upper Part aligns with Part A.
  • Hold the machine with one hand and push the lever down with the other one. Apply pressure and pull the lever up. The front plate will remain on the upper mould.
  • Place the back of the badge on Part B, with the sharp metal edge up. Try to align the plate with the positioning pin to ensure its correct orientation.
  • Rotate the base of the machine until the Upper Part aligns with Part B.
  • Hold the machine with one hand and push the lever down with the other one. Apply pressure and pull it back up.
  • Rotate the base of the machine again and remove the badge.

Additional Information

Reference nº 925 366
Post your question

Questions and Answers

There are no entries.

The legal stuff about cookies:


This message requires us to tell you about ourcookie policy.

If you continue browsing, we'll assume you accept it and think it's okay.

Don't worry, this message only comes up once.