Loading..

Product was successfully added to your shopping cart.
€3.69

Sublimation Water Bottle with 2 caps - 500ml - Aluminium - White

Ref. 038066

Sublimation Water Bottle with 2 caps - 500ml - Aluminium - White

  • Sublimation Water Bottle with 2 caps - 500ml - Aluminium - White - Personalised example
  • Sublimation Water Bottle with 2 caps - 500ml - With screw cap
  • Sublimation Water Bottle with 2 caps - 500ml - Bottom
  • Sublimation Water Bottle with 2 caps - 500ml - With dosing cap
€3.69

Sublimation Water Bottle with 2 caps - 500ml - Aluminium - White

Ref. 038066

A water bottle you can personalise using sublimation printing.

  • Made of aluminium, coated with white-coloured polyester with gloss finish. Suitable for sublimation.
  • Includes 2 plastic caps with a screw-type closure.
  • Print area: 24 x 14.5 cm

More information about the 500ml aluminium Water Bottle with 2 caps.

How to sublimate this bottle?

+ Read More
- Read Less
Availability:
  • Immediate: 0 units
  • Expected entry the 18/12/2020: 298 units
  • If you want to schedule an order that exceeds our TOTAL availability, please contact customersupport@brildor.com including the reference of the product you are interested in. This does not apply to products in the outlet section.

€3.69
/ Each Unit VAT not included
  • Buy 12 for €3.32 each
  • Buy 60 for €2.95 each
  • Buy 180 for €2.69 each

Brildor Club is a direct discount program for your purchases. Whenever you place an order (minimum purchase of €10), some discount balance will be generated into your customer account for you to use on your next purchase. The more you buy, the more you save.
You will get access to the Brildor Club as soon as you register as a new customer, and will receive a €5 welcome balance.

 

How do I get some discount balance?


As a Regular Brildor Member:

  • On orders up to €180, you may receive €0.20 for every €10 you spend
  • On orders over €180, you may receive €0.30 for every €10 you spend
  • We will give you an extra €10 if you make 10 purchases over €100


As a Premium Brildor Member:

If you are a Premium Member of the Brildor Club, you will accumulate 25% more balance, so you can obtain:

  • On orders up to €180, you may receive €0.25 for every €10 you spend
  • On orders over €180, you may receive €0.375 for every €10 you spend

  

Who are Premium Brildor Members?


If over the last 12 months your purchases have exceeded €3,000, you will automatically be upgraded to the Premium Brildor Member category. This amount is checked daily. As soon as you reach it, you will become a Premium Member the day after.

 

Terms and conditions of the Brildor Club

  • Loyalty balance will be added when placing an order with an immediate payment method (Credit/debit card, Paypal and Pagantis).
  • Your balance will show in the "Your credit" section inside "Your account", and you can use it by selecting "Payment methods".
  • You can use your balance without needing to have a minimum accumulated amount or reach a minimum order value. Nonetheless, you won't be able to get a higher discount than your order value.
  • Balance expires after 6 months without making any purchase.
  • The balance is calculated on the net amount of the purchase: excluding taxes, shipping, coupons, and promotional discounts.
  • The cancellation of an order implies the loss of the balance generated in that purchase.
  • On a full-order return, the amount to be refunded will be the amount paid by the customer.
  • If the return of the order is due to causes beyond the control of Brildor, the redeemed balance won't be restored. However, the balance generated with this purchase won't be removed.
Sublimation Water Bottle with 2 caps - 500ml - Aluminium - White Description

More information about the 500ml aluminium Water Bottle with 2 caps for sublimation

  • White-coloured plastic mouthpiece.
  • Dosing cap with black plastic screw fitting.
  • Screw cap with a ring, and a silver-coloured metal carabiner hook.
  • Fit for consumption.
  • Comes in a white cardboard box designed for the bottle.
  • Customisable using a mug Heat Press or a Sublimation Oven.
  • In Related Products, you will find Bottle Wraps, silicone sheets, moulds and heat shrink bags to sublimate this bottle with a sublimation oven.

DIMENSIONS (APPROX.)

Volume capacity
500 ml 18 oz
Dosing cap Ø5 cm
Screw cap Ø5 cm
Mouthpiece Ø3.5 cm
Base Ø7.4 cm
Height 16.5 cm
Print area 24 x 14.5 cm

Recommended instructions and parameters for sublimation printing

WITH A MUG HEAT PRESS

  • Print the design in mirror image.
  • Preheat the press to 200ºC.
  • Remove the caps from the bottle.
  • Hold the paper's printed side against the bottle and fix it with Heat Resistant Tape.
  • Place the bottle inside a suitable Mug Heater and introduce it into the mug press.
  • Close the press at medium-heavy pressure for 120 seconds.
  • Using a protective glove, remove the newly printed water bottle.
  • Remove the paper carefully.

WITH A SUBLIMATION OVEN

  • Print the design in mirror image.
  • Preheat the sublimation oven to 200ºC.
  • Remove the caps from the bottle.
  • Hold the paper's printed side against the bottle and fix it with Heat Resistant Tape.
  • Place a wrap for oven sublimation around the bottle, or put it in a mould or in a Heat Shrink Bag to create a vacuum with a Heat Gun.
  • Put the water bottle in the oven for 8 minutes
  • At the end of the process, remove the bottle using a protective glove.
  • Carefully remove the wrap, or the bag, and then the paper.

Additional Information
Reference nº 038 066
Net Weight (kg) 0.098
Gross Weight (kg) 0.138
Billable Weight 0.1518
Dimensions (mm) 245 x 165
Print area (mm) 245 x 145
Colour White
Surface material Aluminium
Items Bottles
Accessory details Carabiner
Marking techniques Sublimation
Post your question

Questions and Answers

There are no entries.

Sublimation Water Bottle with 2 caps - 500ml - Aluminium - White Description

More information about the 500ml aluminium Water Bottle with 2 caps for sublimation

  • White-coloured plastic mouthpiece.
  • Dosing cap with black plastic screw fitting.
  • Screw cap with a ring, and a silver-coloured metal carabiner hook.
  • Fit for consumption.
  • Comes in a white cardboard box designed for the bottle.
  • Customisable using a mug Heat Press or a Sublimation Oven.
  • In Related Products, you will find Bottle Wraps, silicone sheets, moulds and heat shrink bags to sublimate this bottle with a sublimation oven.

DIMENSIONS (APPROX.)

Volume capacity
500 ml 18 oz
Dosing cap Ø5 cm
Screw cap Ø5 cm
Mouthpiece Ø3.5 cm
Base Ø7.4 cm
Height 16.5 cm
Print area 24 x 14.5 cm

Recommended instructions and parameters for sublimation printing

WITH A MUG HEAT PRESS

  • Print the design in mirror image.
  • Preheat the press to 200ºC.
  • Remove the caps from the bottle.
  • Hold the paper's printed side against the bottle and fix it with Heat Resistant Tape.
  • Place the bottle inside a suitable Mug Heater and introduce it into the mug press.
  • Close the press at medium-heavy pressure for 120 seconds.
  • Using a protective glove, remove the newly printed water bottle.
  • Remove the paper carefully.

WITH A SUBLIMATION OVEN

  • Print the design in mirror image.
  • Preheat the sublimation oven to 200ºC.
  • Remove the caps from the bottle.
  • Hold the paper's printed side against the bottle and fix it with Heat Resistant Tape.
  • Place a wrap for oven sublimation around the bottle, or put it in a mould or in a Heat Shrink Bag to create a vacuum with a Heat Gun.
  • Put the water bottle in the oven for 8 minutes
  • At the end of the process, remove the bottle using a protective glove.
  • Carefully remove the wrap, or the bag, and then the paper.

Additional Information

Reference nº 038 066
Net Weight (kg) 0.098
Gross Weight (kg) 0.138
Billable Weight 0.1518
Dimensions (mm) 245 x 165
Print area (mm) 245 x 145
Colour White
Surface material Aluminium
Items Bottles
Accessory details Carabiner
Marking techniques Sublimation
Post your question

Questions and Answers

There are no entries.

The legal stuff about cookies:


This message requires us to tell you about ourcookie policy.

If you continue browsing, we'll assume you accept it and think it's okay.

Don't worry, this message only comes up once.