Loading..

Product was successfully added to your shopping cart.
€699.00

3D Sublimation Vacuum Heat Press Machine

Ref. 027647

3D Sublimation Vacuum Heat Press Machine

  • 3D Sublimation Vacuum Heat Press Machine - Example of use with mugs and wraps
  • 3D Sublimation Vacuum Heat Press Machine - Example of use with cases, jigs and the vacuum membrane
  • 3D Sublimation Vacuum Heat Press Machine - Examples of use for upper and lower trays
  • 3D Sublimation Vacuum Heat Press Machine - Examples of use with vacuum moulds and jigs
€699.00

3D Sublimation Vacuum Heat Press Machine

Ref. 027647

A 3D sublimation machine designed for personalisation through sublimation printing. Particularly useful for printing surfaces of non-flat objects.

  • Works with a combination of vacuum pressure and heat.
  • Allows the sublimation of more than one object at a time.
  • Digital temperature and time control panel, very easy to use.
  • Includes 3 mug wraps and 1 spare for the membrane, the vacuum tube and the sealing rubber.
  • Dimensions of the tray: 42 x 30 x 11 cm

More information about the 3D vacuum heat press machine for sublimation.

+ Read More
- Read Less
Availability:
  • Immediate: 3 units
  • Orders that exceed our availability are generally served in approx. 15 working days.

€699.00
/ Each Unit VAT not included
For each unit you buy, you will accumulate 20,70€ to redeem on your next order. Discover the Brildor Loyalty Program

Brildor Club is a direct discount program for your purchases. Whenever you place an order (minimum purchase of €10), some discount balance will be generated into your customer account for you to use on your next purchase. The more you buy, the more you save.
You will get access to the Brildor Club as soon as you register as a new customer, and will receive a €5 welcome balance.

 

How do I get some discount balance?


As a Regular Brildor Member:

  • On orders up to €180, you may receive €0.20 for every €10 you spend
  • On orders over €180, you may receive €0.30 for every €10 you spend
  • We will give you an extra €10 if you make 10 purchases over €100


As a Premium Brildor Member:

If you are a Premium Member of the Brildor Club, you will accumulate 25% more balance, so you can obtain:

  • On orders up to €180, you may receive €0.25 for every €10 you spend
  • On orders over €180, you may receive €0.375 for every €10 you spend

  

Who are Premium Brildor Members?


If over the last 12 months your purchases have exceeded €3,000, you will automatically be upgraded to the Premium Brildor Member category. This amount is checked daily. As soon as you reach it, you will become a Premium Member the day after.

 

Terms and conditions of the Brildor Club

  • Loyalty balance will be added when placing an order with an immediate payment method (Credit/debit card, Paypal and Pagantis).
  • Your balance will show in the "Your credit" section inside "Your account", and you can use it by selecting "Payment methods".
  • You can use your balance without needing to have a minimum accumulated amount or reach a minimum order value. Nonetheless, you won't be able to get a higher discount than your order value.
  • Balance expires after 6 months without making any purchase.
  • The balance is calculated on the net amount of the purchase: excluding taxes, shipping, coupons, and promotional discounts.
  • The cancellation of an order implies the loss of the balance generated in that purchase.
  • On a full-order return, the amount to be refunded will be the amount paid by the customer.
  • If the return of the order is due to causes beyond the control of Brildor, the redeemed balance won't be restored. However, the balance generated with this purchase won't be removed.
3D Sublimation Vacuum Heat Press Machine Description

More information about the 3D vacuum heat press machine for sublimation

  • Perfect for sublimating rigid surfaces with irregular shapes such as shot glasses, mugs, photo frames, ashtrays, plates and cases.
  • Allows the sublimation of different types of material, as long as they are suitable for sublimation: ceramic, glass, slate, aluminium or polymer (plastic).
  • Very resistant and compact structure design made of aluminium and iron.
  • Easy to install, operate and maintain.
  • High performance and low production cost.
  • Has two functions: (1) applying vacuum pressure in such a way that the printed paper fits the object sufficiently; and (2) applying heat to transfer the sublimation inks to the object in a homogeneous manner, so that all its surface reaches the same temperature.
  • It includes 2 trays: the upper one, which works with a membrane that applies pressure when creating the vacuum, and the lower one, which only works with hot air. In order to use it, the upper tray must be removed, and the vacuum tube disconnected.
  • With the lower tray, it is possible to print by only using the heat function of the press, without vacuum pressure. This requires the use of special heat transfer wraps, silicone sheets or heat shrink bags.
  • The upper tray membrane acts as a wrap, applying pressure to the object by creating a vacuum. If the material you print requires it, (polymer objects, etc.) it is recommended to place a mould (or jig) inside to prevent it from warping due to heat and pressure.
  • Special vacuum moulds can also be used. All you need to do is connect the rubber tube to the mould to create the vacuum. These moulds serve as wraps during heat transfer. Just insert the properly prepared object into the mould and connect it to the press.
  • Very useful for mug sublimation due to its tray capacity of up to 12 standard size mugs (11oz).
  • Includes a gauge to measure the pressure that is self-regulated by the press.
  • It is recommended to use at least a protective glove (not included) when handling trays and newly printed items.
  • Available here the 3D Sublimation Vacuum Press Installation and User Manual - PDF 6248 Kb.

TECHNICAL DETAILS

Temperature range 50-200ºC
Time range 1 second - 20 minutes
Maximum power 2800 W
Voltage 120 V / 220 V
Maximum tray size 42 x 30 x 11 cm
Press dimensions
59 x 47 x 32 cm
Packaging dimensions
70.5 x 62.5 x 40 cm
Press weight
19 Kg
Package weight 25 kg
Additional Information
Reference nº 027 647
Net Weight (kg) 19
Gross Weight (kg) 25
Billable Weight 27.5000
Post your question

Questions and Answers

There are no entries.

3D Sublimation Vacuum Heat Press Machine Description

More information about the 3D vacuum heat press machine for sublimation

  • Perfect for sublimating rigid surfaces with irregular shapes such as shot glasses, mugs, photo frames, ashtrays, plates and cases.
  • Allows the sublimation of different types of material, as long as they are suitable for sublimation: ceramic, glass, slate, aluminium or polymer (plastic).
  • Very resistant and compact structure design made of aluminium and iron.
  • Easy to install, operate and maintain.
  • High performance and low production cost.
  • Has two functions: (1) applying vacuum pressure in such a way that the printed paper fits the object sufficiently; and (2) applying heat to transfer the sublimation inks to the object in a homogeneous manner, so that all its surface reaches the same temperature.
  • It includes 2 trays: the upper one, which works with a membrane that applies pressure when creating the vacuum, and the lower one, which only works with hot air. In order to use it, the upper tray must be removed, and the vacuum tube disconnected.
  • With the lower tray, it is possible to print by only using the heat function of the press, without vacuum pressure. This requires the use of special heat transfer wraps, silicone sheets or heat shrink bags.
  • The upper tray membrane acts as a wrap, applying pressure to the object by creating a vacuum. If the material you print requires it, (polymer objects, etc.) it is recommended to place a mould (or jig) inside to prevent it from warping due to heat and pressure.
  • Special vacuum moulds can also be used. All you need to do is connect the rubber tube to the mould to create the vacuum. These moulds serve as wraps during heat transfer. Just insert the properly prepared object into the mould and connect it to the press.
  • Very useful for mug sublimation due to its tray capacity of up to 12 standard size mugs (11oz).
  • Includes a gauge to measure the pressure that is self-regulated by the press.
  • It is recommended to use at least a protective glove (not included) when handling trays and newly printed items.
  • Available here the 3D Sublimation Vacuum Press Installation and User Manual - PDF 6248 Kb.

TECHNICAL DETAILS

Temperature range 50-200ºC
Time range 1 second - 20 minutes
Maximum power 2800 W
Voltage 120 V / 220 V
Maximum tray size 42 x 30 x 11 cm
Press dimensions
59 x 47 x 32 cm
Packaging dimensions
70.5 x 62.5 x 40 cm
Press weight
19 Kg
Package weight 25 kg

Additional Information

Reference nº 027 647
Net Weight (kg) 19
Gross Weight (kg) 25
Billable Weight 27.5000
Post your question

Questions and Answers

There are no entries.

The legal stuff about cookies:


This message requires us to tell you about ourcookie policy.

If you continue browsing, we'll assume you accept it and think it's okay.

Don't worry, this message only comes up once.