More information about the sublimation cotton touch T-shirts 190g

INDEX

> Things to keep in mind

> Important notice

> Dimensions

> Recommended instructions and parameters for sublimation printing

THINGS TO KEEP IN MIND

• Sometimes sublimation paper may leave marks on the T-shirt after pressing. The foam pad creates a cushioning layer and helps to reduce these marks. Find it in Related Products
• To avoid ghosting caused by slight shifts in the paper during the heat transfer, use temporary adhesive spray
• Also suited for personalisation using embroidery, rhinestones, transfer, HTV, screen printing or Direct-to-Garment printing (DTG)

IMPORTANT NOTICE

• T-shirts may show slight variations in shade, size by measurement, and shape. This depends on the production batch

DIMENSIONS

• Measurements are in centimetres
• Approximate values for guidance purposes only

RECOMMENDED INSTRUCTIONS AND PARAMETERS FOR SUBLIMATION PRINTING

• Print the design in mirror image
• Preheat the press to 200°C
• Clean the garment with a lint roller to remove dust and impurities that could stain the fabric
• Put protective paper inside the T-shirt to prevent the design from showing on the back
• Place the T-shirt on the lower platen of the press and the paper's printed side against it
• Press for 40-50 seconds, medium pressure.
• Using a protective glove, remove the newly printed T-shirt
• Carefully peel off the paper