More information about the Clothing Labeler and Accessories

INDEX

> Description

> Things to keep in mind

> Measurements

> Instructions for use

DESCRIPTION

• Label applicator with protective cap for the needle and wrist strap
• Labels and identifies fabrics or garments without damaging them
• Compatible with needles N1-P, N2-P, N3-P, and N4-P
• Suitable for thick and thin tag pins or fasteners
• Easy insertion of the tag pin into the garment. Simply place the block of tag pins in the gun and pull the trigger to attach the labels
• The pack of tag pins includes 1,000 units of 35 mm in white, distributed in 20 strips of 50 tag pins each

MEASUREMENTS

INSTRUCTIONS FOR USE

• Turn the plastic lock 180º forward (clockwise) and insert the needle
• To insert the needle, ensure the groove is facing upwards. Make sure the needle slot and the gun are perfectly aligned
• Return the lock to its original position. If it doesn't close, do not force it. This blockage occurs because the needle is either too far out or too far in. Adjust it, and you will be able to lock it easily
• If you have a needle installed and want to change it, open the lock and gently pull the needle tip with care to avoid pricking yourself
• If the needle is stuck, use pliers to help pull it out
• Load the tag pins by placing the strip through the thin part
• Once the tag pins are in place, take the label and insert the gun needle through the hole
• Pierce or go through the garment you want to label and pull the trigger