More information about Coolmax cotton touch sublimation socks and jigs

• Highly breathable and moisture-resistant socks thanks to Coolmax yarn. Fast drying even during high intensity physical or sport activities
• Lightweight and flexible fabric with a pleasant cotton touch
• White design with black heel and toe
• Wooden (MDF) jig with rounded edges. Used as a mould or jig for an easy personalisation process
• Can also be personalised with other techniques such as embroidery, rhinestones, transfer paper or heat transfer vinyl

THINGS TO KEEP IN MIND

• These socks can be sublimated all over, but the colours of your design will not be visible in the black areas (heel and toe)
• The wooden fork has an additional layer of paper to protect its surface. Easily removable

DIMENSIONS (APPROX.)

WASHING RECOMMENDATIONS

• Wash inside out at a maximum temperature of 40ºC
• Avoid using bleach

Recommended instructions and parameters for sublimation printing

• Print the design in mirror image
• Preheat the press to 180°C
• Insert the jigs into the socks
• Place the socks on the printed side of the paper and fix them with heat-resistant tape
• Put protective paper on the lower plate of the press and lay the socks on it
• Cover them with another layer of protective paper
• Press for 45 seconds, medium-heavy pressure
• With the help of a protective glove, remove the freshly printed socks on one side
• Carefully remove the heat-resistant tape and paper, leaving the jig inside the sock
• Pull the edge of the sock upwards so that the white trim is not visible when printing on the other side
• Repeat the same process to sublimate the other side
• Take off the jigs while hot and let them cool down