
Sublimation Cotton Touch Socks & Jigs
Unisex mid-calf socks you can personalise with dye sublimation printing.
- Polyester (94%) and lycra (6%) blend fabric with a cotton touch
- Simplify the sublimation process by using the 3mm MDF jigs

Related Products
More information about the Sublimation Cotton Touch Socks & Jigs
INDEX
> Recommended instructions and parameters for sublimation printing
DESCRIPTION
- Adult socks in polyester and lycra with a pleasant cotton touch
- White socks with black heel and toe
- With elastic bands on the leg and instep
- Wooden (MDF) jig with rounded edges. Used as a mould or jig for an easy personalisation process
- It can also be personalised with other techniques such as embroidery, DTF, DTG, HTV, strass or screen printing
THINGS TO KEEP IN MIND
- These socks can be sublimated all over, but the colours of your design will not be visible on the black areas (heel and toe)
DIMENSIONS
Reference no. | 050616 | 050617 | 050618 |
Size | 36-39 | 40-42 | 43-46 |
Sole (cm) | 7.5 x 19 |
8 x 21 |
8 x 23 |
Dimensions (cm) | 10 x 30 |
8 x 35 |
8 x 37.5 |
Cuff (cm) | 7 x 14.5 |
8 x 16.5 |
8 x 18 |
Cuff (cm) | 7 x 2 |
8 x 2 |
8 x 2 |
Print area (cm per side) | 7 x 26 |
8 x 30.5 |
8 x 34.5 |
Weight (g) | 36 |
44 |
48 |
JIGS | |
Dimensions (cm) |
9 x 45 |
Thickness (mm) |
3 |
WASHING RECOMMENDATIONS
- Hand or machine wash at 30ºC maximum
- Do not bleach or dry-clean
- Air dry preferably
- Do not iron
RECOMMENDED INSTRUCTIONS AND PARAMETERS FOR SUBLIMATION PRINTING
Parameters for guidance only. It is recommended to carry out tests to make the necessary adjustments before starting production.
- Print the design in mirror image
- Preheat the press to 180ºC
- Insert the jigs into the socks
- Place the sock on the lower platen of the press with the paper's printed side against it
- Cover them with protective paper
- Press for 45 seconds, medium pressure
- With the help of a protective glove, remove the freshly printed socks
- Carefully remove the heat-resistant tape and paper, leaving the jig inside the sock
- Pull the edge of the sock upwards so that the white trim is not visible when printing on the other side
- Repeat the same process to sublimate the other side of the socks
- Take off the jigs while hot and let them cool down
Ref. | 950338 |
---|---|
Colour | White, Black |
Items | Socks |
Composition | Lycra, Polyester |
Marking techniques | Dye sublimation, DTF, Screen printing, HTV, Embroidery, Rhinestones, Direct printing |
Reviews
Share your opinion
It will only take a minute, and your opinion can help other customers.
Sign in to submit your review
Write a review
Rating
Add photos of your product (optional)
Sending review...
Error
Review sent Thank you for your interest!
Questions
No questions found for this product.
Be the first to ask a question!
Ask a question
Please complete the CAPTCHA
Submitting your question...
Error
Question Submitted Thank you for your interest!