The store will not work correctly in the case when cookies are disabled.
The legal stuff about cookies:
This message requires us to tell you about our cookie policy. If you continue browsing, we'll assume you accept it and think it's okay.
Don't worry, this message only comes up once.
More information about the grade AA white mug for sublimation
Cylindrical body which can be personalised on all its outer surface.
Suitable for personalising with a heat press machine using 11 oz mug heaters. Also with a sublimation oven using clamps, silicone sheets or heat shrink bags and a heat gun.
You will find presentation and transport boxes for this mug in Related Products.
NUMBER OF MUGS PER BOXES AND PALLETS
Box
Mugs
Pallets
1
36
0
36
1154
1
DIMENSIONS (APPROX.)
Capacity
11 oz ≈ 325 ml
Diameter
Ø8.2 cm
Height
9.5 cm
Thickness
3 mm
Handle
1.5 x 7.5 cm
Mug-to-handle distance
4 cm
Print area
24 x 9.5 cm
Recommended instructions and parameters for sublimation printing
WITH A MUG HEAT PRESS
Print the design in mirror image.
Preheat the press to 180ºC
Hold the paper's printed side against the mug and fix it with heat-resistant tape.
Press for 230 seconds, medium-heavy pressure.
Remove the newly printed mug using a protective glove.
Carefully remove the paper.
WITH A SUBLIMATION OVEN
Print the design in mirror image.
Preheat the press to 200ºC
Hold the paper's printed side against the mug and fix it with heat-resistant tape.
Adjust the clamp, or place the mug in a heat shrink bag and heat it with a heat gun. Make sure you get rid of all the wrinkles. You can also use a silicone sheet.
Sublimate inside the oven for 8 minutes
Using a protective glove, remove the wrap, the silicone sheet, or the bag, depending on the accessories you used.