Search
Starting at:
€1.19
/ Each Unit
Sublimation Mug - ORCA Grade AA - High Quality
Ref.
028051
High-quality sublimation mug made of grade AA ORCA-coated ceramic with gloss finish.
- Completely smooth print area to ensure perfect sublimation, avoiding gradients at the edges.
- High-quality grade AA ORCA coating that provides very intense colours on its entire printable area.
- Print area free of any irregularity.
- Microwave and dishwasher safe. Will resist 3,000 washes without any colour-quality loss.
- Print area (approx.): 24 x 9.5 cm
Availability:
Immediate: more than 5000 units
Is our availability not enough? Ask to be notified of upcoming entries.
Request Notice
Request Notice
Please, give us an estimate of the quantity you need:
As a Premium Brildor Member, for each unit you buy, you will accumulate {{POINTS}}
to redeem on your next order. Discover the Brildor Loyalty Program.
For each unit you buy, you will accumulate {{POINTS}} to redeem
on your next order. Discover the Brildor Loyalty Program.
How to SUBLIMATE a MUG and HOW MUCH does it REALLY cost?
Related Products
More information about the ORCA grade AA high-quality mug for sublimation
- Fully certified according to food-grade EU regulations.
- Depending on the batch, the mugs may have an ORCA Coatings sticker on their base which can be removed with water or heat.
- There may be some small irregularities on non-printable areas such as handles, on the base or inside, but never on their printable area.
- You will find presentation boxes and individual packaging for these mugs in Related Products.
NUMBER OF MUGS PER BOXES AND PALLETS
| Box | Mugs | Pallets |
| 1 | 36 | 0 |
| 4 | 144 | 0 |
| 16 | 576 | 0 |
| 32 | 1,152 | 1 |
| 64 | 2,304 | 2 |
| 160 | 5,760 | 5 |
DIMENSIONS (APPROX.)
| Capacity | 11 oz ≈ 325 ml |
| Size | Ø8.2 x 9.5 cm |
| Thickness | 3 mm |
| Print area | 24 x 9.5 cm |
| Handle | 1.5 x 7.5 cm |
| Mug-to-handle distance | 4 cm |
Recommended instructions and parameters for sublimation printing
WITH A MUG HEAT PRESS
- Print the design in mirror image.
- Preheat the press to 200ºC with an 11oz Mug Heater.
- Hold the paper's printed side against the mug and fix it with heat-resistant tape.
- Press for 180 seconds, medium-heavy pressure.
- Using a protective glove, remove the newly printed mug.
- Remove the paper carefully.
WITH A MUG OVEN/3D VACUUM
- Print the design in mirror image.
- Preheat the sublimation oven to 200ºC.
- Hold the paper's printed side against the mug and fix it with heat-resistant tape.
- Attach a wrap for oven sublimation or a silicone sheet around the mug. You can also create a vacuum using a heat shrink bag.
- Place the mug in the oven for 15 minutes.
- At the end of the process, remove the mug using a protective glove.
- Remove the paper carefully.
| Ref. | 028051 |
|---|---|
| Net Weight (kg) | 0.318 |
| Gross Weight (kg) | 0.356 |
| Billable Weight | 0.3900 |
| Dimensions (mm) | Ø82 x 95 |
| Print area (mm) | 240 x 95 |
| Thickness (mm) | 3 |
| Colour | White |
| Surface material | Ceramic |
| Items | Mugs |
| Marking techniques | Dye sublimation |
Post your question