More information about the Sublimable Microfibre Cushion Covers

INDEX

> Description

> Things to keep in mind

> Measurements

> Washing recommendations

> Recommended sublimation instructions and parameters

DESCRIPTION

COVERS

• Short pile velvet fabric, soft to the touch
• Customisable pillows on both sides, from seam to seam
• Includes a Brildor-designed label with a 3 x 2 cm space to print your company or shop logo or identification. It can be trimmed to only show your business identification

FILLING

• Non-woven fabric (TST) exterior, 100% polypropylene
• Hollow conjugated siliconised fibre interior, 100% polyester
• Increase the volume or firmness of the filling by purchasing fibre separately. See in Related Products
• Delivered vacuum-packed

THINGS TO KEEP IN MIND

• Although they can be fully customised, we recommend leaving 0.5 cm at the zipper part (the width of the seam) to avoid damage

MEASUREMENTS

COVERS

FILLING^(*)

^(*) Not included with the cushion cover

WASHING RECOMMENDATIONS

• Maximum washing temperature: 40 °C
• Do not dry clean
• Do not bleach
• Air dry
• Iron at low temperature

RECOMMENDED SUBLIMATION INSTRUCTIONS AND PARAMETERS

Parameters indicated as guidelines. It is recommended to conduct preliminary tests to make necessary adjustments before starting production.

• Print the design in mirror mode
• Heat the press to 180º
• Place the cover on the press base and the printed side of the paper on the cover
• Close the press with medium-high pressure for 60 seconds
• With the help of a protective glove, remove the newly sublimated cover
• Carefully remove the paper