More information about the velvet cushion covers for sublimation

• Very soft and pleasant velvet fabric.
• Includes a label, specially designed by Brildor, with a 3 x 2 cm blank space to print your company’s logo. Washing instructions are visible on the back. It is possible to cut the label so that you can only see your business’ identification.
• Customisable on both sides and their entire surface area.
• They are not translucent.

WASHING RECOMMENDATIONS

• Machine wash at a maximum temperature of 40ºC
• Do not use bleach.
• Do not tumble dry.
• Iron at low temperature. 110ºC max.
• Do not dry clean.

THINGS TO KEEP IN MIND

• It is advisable to iron with the zip open to avoid damage.
• You can personalise these covers by combining dye sublimation printing with other techniques such as embroidery, rhinestones, transfer, HTV, Direct-to-Garment (DTG), and screen printing.

Recommended instructions and parameters for sublimation printing

• Print the design in mirror image.
• Preheat the press to 200ºC
• Place the cover on the press’ lower platen.
• Put protective paper inside the cover to avoid staining the other side.
• Position the printed design on the cover. Fix it with heat-resistant tape so it doesn’t move.
• Make sure the zip is open and press for 45 seconds, medium-heavy pressure.
• Open the press. Using a protective glove, remove the newly printed cover.
• Remove the paper carefully.