More information about the Sublimation Round Satin Cushion Covers with Flap Closure and Filling

INDEX

> Description

> Things to keep in mind

> Dimensions

> Washing recommendations

> Recommended instructions and parameters for sublimation printing

DESCRIPTION

COVERS

• White fabric with a gloss finish
• Envelope closure that facilitates complete printing
• Includes a label with 3 x 2 cm blank space for you to print your company’s logo. Washing instructions will be visible on the back
• Can also be personalised with other techniques such as embroidery, transfer, vinyl, DTG, DTF and screen printing

CUSHION PADS

• Non-woven fabric (TST) outer, 100% polypropylene
• Interior of siliconised hollow conjugated fibre, 100% polyester
• Increase the volume or firmness of the cushion filling by purchasing fibre separately. See in Related Products
• Delivered vacuum packed

THINGS TO KEEP IN MIND

• Cushion pads are sold separately. The most suitable for the Ø27.5 cm cover is the Ø25 cm one (Ref. 003880)

DIMENSIONS

COVERS

CUSHION PADS^(*)

^(*)Not included with cushion cover

WASHING RECOMMENDATIONS

• Maximum washing temperature: 40 °C
• Do not bleach or dry-clean
• Air dry
• Iron at low temperature

RECOMMENDED INSTRUCTIONS AND PARAMETERS FOR SUBLIMATION PRINTING

Parameters provided as a guideline. It is recommended to carry out preliminary tests in order to make the necessary adjustments before starting production.

• Print the design in mirror image
• Preheat the press to 200 ºC
• Place the cushion cover on the lower platen of the press and the paper's printed side against it
• Close the press with medium-high pressure for 35 seconds
• Remove the newly printed cover using a protective glove
• Peel off the paper carefully