More information about the glass bottle with softshell sleeve for sublimation
Perfect for carrying water and other drinks to the office, beach, gym, trips or walks and much more.
Ecological and reusable glass bottle. Solution for not drinking from plastic and avoiding the use of disposable bottles.
Cylindrical body made of thick glass with a high shock and high temperature resistance. it does not transfer flavour to the drink due ot its material.
Padded, resistant and elastic neoprene-like sleeve with thick stitching. Water-repellent polyester outer fabric with DWR treatment that prevents water from forming droplets and rolling off.
Screw-on lid with a silicone gasket that completely seals the glass bottle and prevents leakage.
Wide opening for easy cleaning.
Comes in a kraft cardboard presentation box.
THINGS TO KEEP IN MIND
You can personalise the sleeve by combining the sublimation technique with HTV, transfer or screen printing.
We suggest sublimation on each side by pressing twice to achieve a complete print.
We recommend washing the cap by hand.
The bottle can also be customised with HTV or transfer to give it a more personal touch.
DIMENSIONS (APPROX.)
Capacity
18 oz ≈ 530 ml
Bottle
Ø6.2 x 22.2 cm
Bottle opening
Ø4.9 x 2 cm
Lid
Ø6.2 x 2.5 cm
Carry strap
11 x 0.5 cm
Sleeve
10 x 18.5 cm
Print area (per side)
10 x 17 cm
Full print area
22 x 17
Presentation box
7.5 x 24 x 7.5 cm
Water bottle weight
352 g
Recommended instructions and parameters for sublimation printing
WITH A HEAT PRESS
Print the design in mirror image.
Preheat the press to 180ºC
Place the sleeve on the press’ lower platen. Slide protective paper inside the sleeve to avoid staining the other side.
Position the printed design on the sleeve. Fix it with heat-resistant tape so it doesn’t move.
Press for 60 - 70 seconds, medium pressure.
Open the press. Using a protective glove, remove the newly printed sleeve.
Remove the paper carefully.
Repeat the same process to sublimate the other side.
WITH A SUBLIMATION OVEN
Print the design in mirror image.
Preheat the press to 180ºC
Remove the lid from the bottle.
Fit the bottle into the sleeve and place the printed design around it. Fix it with heat resistant tape.
Place the bottle with the sleeve inside a heat shrink bag and heat it with a heat gun, making sure you get rid of all the wrinkles.
Sublimate for 8 minutes
Remove the heat shrink bag using a protective glove.
Carefully take the paper out of the sleeve and remove the sleeve from the bottle.
https://www.brildor.com/en/sublimation-glass-bottle-softshell-sleeve27666Sublimation Glass Bottle with softshell sleeve<p><a name="know-more1"></a></p>
<h2>More information about the glass bottle with softshell sleeve for sublimation</h2>
<ul>
<li>Perfect for carrying water and other drinks to the office, beach, gym, trips or walks and much more.</li>
<li>Ecological and reusable glass bottle. Solution for not drinking from plastic and avoiding the use of disposable bottles.</li>
<li>Cylindrical body made of thick glass with a high shock and high temperature resistance. it does not transfer flavour to the drink due ot its material.</li>
<li>Padded, resistant and elastic neoprene-like sleeve with thick stitching. Water-repellent polyester outer fabric with DWR treatment that prevents water from forming droplets and rolling off.</li>
<li>Screw-on lid with a silicone gasket that completely seals the glass bottle and prevents leakage.</li>
<li>Wide opening for easy cleaning.</li>
<li>Comes in a kraft cardboard presentation box.</li>
</ul>
<p><strong>THINGS TO KEEP IN MIND<br></strong></p>
<ul>
<li>You can personalise the sleeve by combining the <span class="azul-brildor-negrita">sublimation</span> technique with <strong><span class="azul-brildor-negrita">HTV</span>, <span class="azul-brildor-negrita">transfer</span> or <span class="azul-brildor-negrita">screen printing</span></strong>.</li>
<li>We suggest sublimation on each side by pressing twice to achieve a complete print.</li>
<li>We recommend washing the cap by hand.</li>
<li>The bottle can also be customised with <span class="azul-brildor-negrita">HTV</span> or<span class="azul-brildor-negrita"> transfer</span> to give it a more personal touch.</li>
</ul>
<p><strong>DIMENSIONS (APPROX.)</strong></p>
<table>
<tbody>
<tr>
<td><strong>Capacity</strong></td>
<td style="text-align: center;"><strong><span class="azul-negrita">18 oz ≈ 530 ml</span></strong></td>
</tr>
<tr>
<td><strong>Bottle</strong></td>
<td style="text-align: center;"><strong><span class="azul-negrita"><span class="azul-negrita">Ø</span>6.2 x 22.2 cm</span></strong></td>
</tr>
<tr>
<td><strong><strong>Bottle opening<br></strong></strong></td>
<td class="azul-negrita" style="text-align: center;"><span class="azul-negrita">Ø4.9 x 2 cm<br></span></td>
</tr>
<tr>
<td><strong><strong>Lid<br></strong></strong></td>
<td class="azul-negrita" style="text-align: center;"><span class="azul-negrita">Ø6.2 x 2.5 cm</span></td>
</tr>
<tr>
<td><strong><strong>Carry strap</strong></strong></td>
<td class="azul-negrita" style="text-align: center;"><span class="azul-negrita">11 x 0.5 cm</span></td>
</tr>
<tr>
<td><strong><strong>Sleeve</strong></strong></td>
<td class="azul-negrita" style="text-align: center;"><span class="azul-negrita">10 x 18.5 cm</span></td>
</tr>
<tr>
<td><strong>Print area (per side)</strong></td>
<td class="azul-negrita" style="text-align: center;"><strong><span class="azul-negrita">10 x 17 cm</span></strong></td>
</tr>
<tr>
<td><strong>Full print area</strong></td>
<td class="azul-negrita" style="text-align: center;"><strong><span class="azul-negrita">22 x 17</span></strong></td>
</tr>
<tr>
<td><strong><strong>Presentation box<br></strong></strong></td>
<td class="azul-negrita" style="text-align: center;"><span class="azul-negrita"> 7.5 x 24 x 7.5 cm<br></span></td>
</tr>
<tr>
<td><strong><strong>Water bottle weight</strong></strong></td>
<td class="azul-negrita" style="text-align: center;"><span class="azul-negrita">352 g</span></td>
</tr>
</tbody>
</table>
<p> </p>
<p><a name="know-more2"></a></p>
<h2>Recommended instructions and parameters for sublimation printing</h2>
<p><strong>WITH A HEAT PRESS</strong></p>
<ul>
<li>Print the design in <strong>mirror image</strong>.</li>
<li>Preheat the press to <span class="azul-negrita">180ºC</span></li>
<li>Place the sleeve on the press’ lower platen. Slide protective paper inside the sleeve to avoid staining the other side.</li>
<li>Position the printed design on the sleeve. Fix it with heat-resistant tape so it doesn’t move.</li>
<li>Press for <span class="azul-negrita">60 - 70 seconds</span>, medium pressure.</li>
<li>Open the press. Using a protective glove, remove the newly printed sleeve.</li>
<li>Remove the paper carefully.</li>
<li>Repeat the same process to sublimate the other side.</li>
</ul>
<p><strong>WITH A SUBLIMATION OVEN</strong></p>
<ul>
<li>Print the design in <strong>mirror image</strong>.</li>
<li>Preheat the press to <span class="azul-negrita">180ºC</span></li>
<li>Remove the lid from the bottle.</li>
<li>Fit the bottle into the sleeve and place the printed design around it. Fix it with heat resistant tape.</li>
<li>Place the bottle with the sleeve inside a heat shrink bag and heat it with a heat gun, making sure you get rid of all the wrinkles.</li>
<li>Sublimate for <span class="azul-negrita">8 minutes</span></li>
<li>Remove the heat shrink bag using a protective glove.</li>
<li>Carefully take the paper out of the sleeve and remove the sleeve from the bottle.</li>
</ul>https://www.brildor.com/media/catalog/product/b/o/botella-de-cristal-con-funda-para-sublimacion-de-tejido-soft-shell-d1_1.jpg3.99instock3.993.9900000https://www.brildor.com/media/catalog/product/b/o/botella-de-cristal-con-funda-para-sublimacion-de-tejido-soft-shell-d1_1.jpg16615971235032558026166262092721428033/Blanks/Blanks/Water Bottles & Flasks/Blanks/Water Bottles & Flasks/Water Bottles/Blanks/Water Bottles and Flasks2021-07-24T05:59:42+0000
