Silicone side serves as a placemat allowing you to eat on it directly
Velcro straps closure
Easy to close and open. Straight-cut corners for easy folding. Folds inwards as if you were wrapping a present
Lightweight and pleasant to the touch
Easy to clean. Wipe the silicone sleeve after use
Eco-friendly and reusable. Reduces daily use of plastics and aluminium foil.
Can also be personalised with other techniques alone or in combination with sublimation printing: HTV, DTF or DTG printing, screen printing and textile transfer
THINGS TO KEEP IN MIND
Leave the Velcro strap out of the press during sublimation
Before personalising the sandwich bag using Direct-to-Garment (DTG) printing, you must carry out the appropriate pre-treatment for polyester printing
The silicone coating includes a plastic protective film. It must be peeled off before sublimating the wrap
Before you start, make sure the area where the food will be placed is clean
Unfold the sandwich wrap completely, leaving the silicone part visible, and place the velcro (hook strap) and the fabric strap (loop strap) at opposite ends
Remove the protective film
Place the food in the middle
Fold the top and bottom of the sandwich wrap over it as if it were wrapping paper
To close it, take the end of the fabric strap and hook it to the Velcro strap
If you plan on storing it for a while, we recommend lining it with parchment paper to prevent the silicone from sticking
DIMENSIONS (APPROX.)
Size (cm)
53 x 32
Velcro (cm)
7 x 2.4
Fabric strap (cm)
9 x 2.4
Print area (cm)
53 x 32
Weight (g)
185
RECOMMENDED INSTRUCTIONS AND PARAMETERS FOR SUBLIMATION PRINTING
Print the design in mirror image
Preheat the press to 200ºC
Place it on the press' lower platen with the paper's printed side against it
Press for 35 seconds, medium-heavy pressure
Remove the newly printed sandwich bag using a protective glove
Carefully peel off the paper
WASHING RECOMMENDATIONS
Wash at 60ºC maximum
Do not use bleach
Suitable for tumble dryer
You can use some disinfectant and a cloth on the silicone side for future use
https://www.brildor.com/en/sublimation-reusable-sandwich-wraps27214Sublimation Reusable Sandwich Wraps<p><a name="saber-mas"></a></p>
<h2>More information about the reusable sandwich wraps for sublimation</h2>
<p> </p>
<p><strong>INDEX</strong></p>
<p>> <a href="#saber-mas1">Description</a></p>
<p>> <a href="#saber-mas2">Things to keep in mind</a></p>
<p>> <a href="#saber-mas2">BPA-free data sheet</a></p>
<p>> <a href="#saber-mas2">Instructions for use</a></p>
<p>> <a href="#saber-mas3">Dimensions (approx.)</a></p>
<p>> <a href="#saber-mas4">Recommended instructions and parameters for sublimation printing</a></p>
<p>> <a href="#saber-mas2">Washing recommendations</a></p>
<p> </p>
<p><a name="saber-mas1"></a></p>
<p><strong>DESCRIPTION</strong></p>
<ul>
<li>Food grade. Bisphenol-A (BPA) free</li>
<li>Silicone side serves as a placemat allowing you to eat on it directly</li>
<li>Velcro straps closure</li>
<li>Easy to close and open. Straight-cut corners for easy folding. Folds inwards as if you were wrapping a present</li>
<li>Lightweight and pleasant to the touch</li>
<li>Easy to clean. Wipe the silicone sleeve after use</li>
<li>Eco-friendly and reusable. Reduces daily use of plastics and aluminium foil.</li>
<li>Can also be personalised with other techniques alone or in combination with <span class="azul-brildor-negrita">sublimation printing</span>: <span class="azul-brildor-negrita">HTV</span>, <span class="azul-brildor-negrita">DTF</span> or <span class="azul-brildor-negrita">DTG</span> printing, <span class="azul-brildor-negrita">screen printing</span> and <span class="azul-brildor-negrita">textile transfer</span></li>
</ul>
<p> </p>
<p><a name="saber-mas2"></a></p>
<p><strong>THINGS TO KEEP IN MIND<br></strong></p>
<ul>
<li>Leave the Velcro strap out of the press during sublimation</li>
<li>Before personalising the sandwich bag using <span class="azul-brildor-negrita">Direct-to-Garment (DTG) printing</span>, you must carry out the appropriate pre-treatment for polyester printing</li>
<li>The silicone coating includes a plastic protective film. It must be peeled off before sublimating the wrap</li>
</ul>
<p> </p>
<p><a name="saber-mas3"></a></p>
<p><strong>BPA-FREE DATA SHEET</strong></p>
<p><a title="BPA-free data sheet" href="https://www.brildor.com/media/upload/descargas/BPA_FREE_Report_Portabocadillos_de_Tela_Brildor_01.pdf" target="_blank" rel="nofollow noopener">BPA-free data sheet(.pdf - 824 kB)</a></p>
<p> </p>
<p><a name="saber-mas4"></a></p>
<p><strong>INSTRUCTIONS FOR USE</strong></p>
<ul>
<li>Before you start, make sure the area where the food will be placed is clean</li>
<li>Unfold the sandwich wrap completely, leaving the silicone part visible, and place the velcro (hook strap) and the fabric strap (loop strap) at opposite ends</li>
<li>Remove the protective film</li>
<li>Place the food in the middle</li>
<li>Fold the top and bottom of the sandwich wrap over it as if it were wrapping paper</li>
<li>To close it, take the end of the fabric strap and hook it to the Velcro strap</li>
<li>If you plan on storing it for a while, we recommend lining it with parchment paper to prevent the silicone from sticking</li>
</ul>
<p> </p>
<p><a name="saber-mas5"></a></p>
<p><strong>DIMENSIONS (APPROX.)</strong></p>
<table>
<tbody>
<tr>
<td><strong>Size (cm)<br></strong></td>
<td class="azul-negrita"><strong><strong>53 x 32<br></strong></strong></td>
</tr>
<tr>
<td><strong>Velcro (cm)<br></strong></td>
<td class="azul-negrita">7 x 2.4</td>
</tr>
<tr>
<td><strong>Fabric strap (cm)<br></strong></td>
<td class="azul-negrita">9 x 2.4</td>
</tr>
<tr>
<td><strong>Print area (cm)<br></strong></td>
<td><span class="azul-negrita">53 x 32</span></td>
</tr>
<tr>
<td><strong>Weight (g)<br></strong></td>
<td class="azul-negrita">185</td>
</tr>
</tbody>
</table>
<p> </p>
<p><a name="saber-mas7"></a></p>
<p><strong>RECOMMENDED INSTRUCTIONS AND PARAMETERS FOR SUBLIMATION PRINTING</strong></p>
<ul>
<li>Print the design in <strong>mirror image</strong></li>
<li>Preheat the press to <span class="azul-negrita">200ºC</span></li>
<li>Place it on the press' lower platen with the paper's printed side against it</li>
<li>Press for <span class="azul-negrita">35 seconds</span>, medium-heavy pressure</li>
<li>Remove the newly printed sandwich bag using a protective glove</li>
<li>Carefully peel off the paper</li>
</ul>
<p> </p>
<p><a name="saber-mas6"></a></p>
<p><strong>WASHING RECOMMENDATIONS </strong></p>
<ul>
<li>Wash at <span class="azul-negrita">60ºC</span> maximum</li>
<li>Do not use bleach</li>
<li>Suitable for tumble dryer</li>
<li>You can use some disinfectant and a cloth on the silicone side for future use</li>
</ul>https://www.brildor.com/media/catalog/product/f/u/funda-portabocadillos-para-sublimacion-d18.jpg5.24instock05.24000https://www.brildor.com/media/catalog/product/f/u/funda-portabocadillos-para-sublimacion-d18.jpg2431979623699237942432825190255672561926628268704353943649/Blanks/Blanks/Back to School/Blanks/Homeware/Blanks/Only at Brildor/Outlet/Outlet/Personalizables 2021-07-24T06:05:49+0000