More information about face masks for sublimation

• Personalised, they give an original and even fun touch to clothing, especially for children and young people.
• Decorative accessory, not intended for medical purposes.
• They are labelled with the OEKO-Tex Standard 100, which guarantees that the fabric they are made of does not contain substances that are harmful to health.
• They protect from the natural act of touching your face and from breathing dust, pollen or other particles found in the air. They do not fulfil the function of an approved sanitary mask for protection against coronavirus.
• Unisex. They are suitable for children, women and men of all ages.
• Lightweight, very comfortable to wear.
• With an elastic for ease of placement, holding the mask loosely. No tying up required.
• Reusable. Can be reused as many times as desired.

RECOMMENDATIONS

• Wash before use.
• Machine wash at a maximum temperature of 40º C.
• For greater certainty about the size of the mask to choose, it is convenient to print the template on paper (provided below), crop it and test it.
• Due to the size of the children's masks, they may be suitable for kids aged 7-8 years or older (see dimensions).
• Available here the OEKO-TEX Standard 100 Label for 100% Polyester Face Masks (.pdf - 408 Kb)
• More information on products for prevention against the spread of the COVID-19 virus in Spain: Boletín Oficial del Estado - Núm. 109 del 19 de abril de 2020 (.pdf - 244 kB).

DOWNLOADABLE TEMPLATES (PSD/PNG Format)

Brildor Template Customisable Mask for Kids (.psd - 266kB).

Brildor Template Customisable Mask for Kids (.png - 27kB).

Brildor Template Customisable Mask for Adults (.psd - 334kB).

Brildor Template Customisable Mask for Adults (.png - 30kB).

Mask dimensions for kids and adults (approx.)

NOTE

• These values are approximate and are provided as a guide.
• They may vary slightly as a result of normal irregularities in the manufacturing process.

Recommended instructions and parameters for sublimation printing

• Print the design in mirror image and trim it in the shape of the mask.
• Preheat the press to 200ºC
• Put protective paper on the press' lower plate.
• Hold the paper's printed side against the mask. Fix it with heat-resistant tape, or even better, use a temporary adhesive. Make sure you remove all of the wrinkles.
• Place the mask on the press' lower plate and cover it with protective paper.
• Close the press at heavy pressure for 40 seconds.
• Using a protective glove, remove the newly printed face mask from the press.
• Remove the paper carefully.