More information about Sublimatables Women's 140g T-shirts

INDEX

> Description

> Things to keep in mind

> Important note

> Tips and advice

> Measurements

> Washing recommendations

> Recommended sublimation instructions and parameters

> Related posts

DESCRIPTION

• Fitted cut, round neck and short sleeves
• Can be sublimated over the entire surface, including seams (all over or full print prints)
• The lightweight fabric allows for better breathability
• Can also be customised with other techniques such as DTG, transfer, screen printing, embroidery, rhinestones or heat transfer vinyl

THINGS TO KEEP IN MIND

• They are small fitting. It is advisable to check the measurements for each size before placing your order
• For customisation with DTF, follow the time, temperature and pressure parameters recommended by the film manufacturer. Also ensure not to exceed the maximum temperature the garment fabric can withstand

IMPORTANT NOTE

• The T-shirts may show slight variations in shade, size and shape depending on the manufacturing batch

TIPS AND ADVICE

• You can use anti-marking foam to cushion, avoid or minimise marks from the sublimation paper during pressing
• It is advisable to use a temporary spray adhesive to avoid ghosting during sublimation

MEASUREMENTS

 

Size	A	B	C	D	E	F	G
S	40	59	42.5	17.5	33	8	11
M	44	61	45	20	36	9.5	11.5
L	46	63	47.5	21	39	10.5	13
XL	49	64.5	51.5	21.5	40.5	11	16
2XL	53	66.5	55.5	22	43	11	16.5

• Measurements in centimetres
• Approximate values provided for guidance purposes only

WASHING RECOMMENDATIONS

To maximise the durability of the customisation, it is recommended to:

• Wash at a low temperature
• Turn garments inside out before washing
• Do not use bleach, fabric softeners or harsh detergents
• Preferably air dry
• Wait 48 h before the first wash
• If ironing is necessary, do so inside out and at a low temperature

RECOMMENDED SUBLIMATION INSTRUCTIONS AND PARAMETERS

Parameters are provided for guidance purposes only. It is recommended to carry out preliminary tests to make the necessary adjustments before starting production.

• Print the design in mirror mode
• Heat the press to 200 ºC
• Use a lint roller to clean the garment and remove any impurities or dust that could cause stains
• Place the fabric on the base plate of the press and the printed side of the paper on the fabric
• Close the press with medium-high pressure for 35 seconds
• With the help of a protective glove, remove the freshly printed fabric
• Carefully remove the paper

RELATED POSTS

Sublimation on T-shirts: questions and advice

How to customise T-shirts: Which technique should I choose?

Is it possible to apply DTF on any fabric?

DTF Printing: A Game-Changing Technique For Your T-Shirt Business