
Sublimable Stainless Steel Thermos Glitter 500ml
Reusable thermos bottles with glitter coating, customisable by dye sublimation printing.
- Double stainless steel wall: to keep the liquid cold or hot
- Non-drip closure
- Print area: 23,5 x 12,5 cm

Related Products
More information about Sublimable Stainless Steel Thermos Glitter 500ml
INDEX
> Recommended instructions and parameters for sublimation printing
DESCRIPTION
- Suitable for food consumption. No flavour transfer to the beverage
- Inner wall of stainless steel 304 and outer wall of stainless steel 201. Favours the insulation thermal
- Screw cap with anti-leakage silicone leak-proof. BPA free
- The surface is felt to the touch. Glitter encrusted, does not leave particles behind when swiped
- Perfect alternative to plastic containers
- Delivered individually white box
THINGS TO KEEP IN MIND
- Although it can be sublimated in mug press with the 10/11oz resist, it may be necessary to use a smaller resist (6/9 oz)
- The 10/11oz resist can be used by wrapping the thermos in a silicone foil which will increase its diameter enough to fit the resist. In addition, the use of the foil allows for better temperature distribution
- Before sublimating, it should be noted that the image will blend in with the glitter finish. One way to minimise this effect is to choose dark coloured designs
DIMENSIONS
Capacity (oz ≈ ml) |
17 ≈ 500 |
Base colour |
Pink, blue, gold, silver |
Thermos (cm) | Ø6,8 x 24,5 |
Cap (cm) |
4,2 x 5,2 |
Mouth (cm) |
Ø3,3 x 2 |
Print area (cm) | 23,5 x 12,5 |
Box (cm) |
7,8 x 27 x 7,8 |
Weight (g) |
350 |
RECOMMENDED INSTRUCTIONS AND PARAMETERS FOR SUBLIMATION PRINTING
Parameters are given for guidance only. It is recommended to carry out preliminary tests in order to make the necessary adjustments before starting production.
WITH CUP PLATE
- Print the design in mirror mode
- Heat the iron to 180 °C
- Remove the cap from the thermos
- Place the thermos flask on the iron and the printed part of the paper on the thermos. Fix them using adhesive heat tape
- Close the iron with medium pressure for 60 seconds
- With the help of a protective glove, remove the freshly printed thermos
- Carefully remove the paper
WITH SUBLIMATION OVEN
- Print the design in mirror mode
- Heat the oven to 180-200 °C
- Remove the cap from the thermos
- Place the printed design around the flask and fix them using heat-shrink tape
- Place and tighten the clamp or insert the thermos into a heat shrink bag and peel off with the heat gun. You can also use a silicone sheet
- Sublime in the oven for 6-7 minutes
- With the help of a protective glove, remove the clamp, the silicone film or remove the bag, depending on the case
- Carefully remove the paper from the thermos
Ref. | 951892 |
---|
Reviews
Share your opinion
It will only take a minute, and your opinion can help other customers.
Sign in to submit your review
Write a review
Rating
Add photos of your product (optional)
Sending review...
Error
Review sent Thank you for your interest!
Questions
No questions found for this product.
Be the first to ask a question!
Ask a question
Please complete the CAPTCHA
Submitting your question...
Error
Question Submitted Thank you for your interest!