Lid with tab for safety locking. It is opened by sliding the tab downwards and then pressing the button. When it is upwards the lid cannot be opened
Customisable with heat press using a 6-9oz resistor. Also with sublimation oven using the clamp Ref. 034179, heat shrink bags o silicone sheets
THINGS TO KEEP IN MIND
The base is press-fitted into the thermos flask
Before sublimation, remove the lid and the base must be removed from the thermos flask
DIMENSIONS
Capacity (oz ≈ ml)
17 ≈ 500
Thermos (cm)
Ø6.5 x 24.7
Print area (cm)
20,8 x 19
Presentation box (cm)
7,7 x 25 x 7,7
Weight (g)
295
RECOMMENDED INSTRUCTIONS AND PARAMETERS FOR SUBLIMATION PRINTING
WITH CUP PLATE
Print on design in mode mirror
Preheat the press to 200 °C
Remove the lid and the base of the thermos flask
Place the paper with the printed design around the thermos flask and fix it with heat adhesive tape
Close the press with medium pressure for 35 seconds
With the help of a protective glove retirael thermos flask freshly printed
Carefully peel off the paper
WITH A SUBLIMATION OVEN
Print the design in mode mirror
Heat the oven to 200 ºC
Remove the lid from the water bottle
Place the printed design around the thermos flask and secure it with heat tape
Place and tighten the bracket or insert the thermos flask into a heat shrink bag heat-shrinkable and peel it off with the heat gun. You can also use a silicone sheet
Sublime in the oven for 6-7 minutes
With the help of a protective glove, remove the thermos flask freshly sublimated
https://www.brildor.com/en/sublimatable-stainless-steel-thermo-black-lid-500ml24521Sublimatable Stainless Steel Thermo Black Lid 500ml<p class="enlace"><a id="saber-mas"></a> </p>
<h2>More information about Sublimatable Stainless Steel Thermo Black Lid 500ml</h2>
<p> </p>
<p><strong>INDEX</strong></p>
<p>> <a href="#saber-mas1">Description</a></p>
<p>> <a href="#saber-mas2">Things to keep in mind</a></p>
<p>> <a href="#saber-mas3">Dimensions</a></p>
<p>> <a href="#saber-mas4">Recommended instructions and parameters for sublimation printing</a></p>
<p>> <a href="#saber-mas5">Related post</a></p>
<p> </p>
<p class="enlace"><a id="saber-mas1"></a> </p>
<p><strong>DESCRIPTION</strong></p>
<ul>
<li>Lid with tab for safety locking. It is opened by sliding the tab downwards and then pressing the button. When it is upwards the lid cannot be opened</li>
<li>Customisable with heat press using a <span class="azul-negrita">6-9oz</span> resistor. Also with sublimation oven using the clamp Ref. 034179, heat shrink bags o silicone sheets</li>
</ul>
<p> </p>
<p class="enlace"><a id="saber-mas2"></a> </p>
<p><strong>THINGS TO KEEP IN MIND</strong></p>
<ul>
<li>The base is press-fitted into the thermos flask</li>
<li>Before sublimation, remove the lid and the base must be removed from the thermos flask</li>
</ul>
<p> </p>
<p class="enlace"><a id="saber-mas3"></a> </p>
<p><strong>DIMENSIONS</strong></p>
<table>
<tbody>
<tr>
<td><strong>Capacity (oz ≈ ml)</strong></td>
<td><span class="azul-negrita">17 ≈ 500</span></td>
</tr>
<tr>
<td><strong>Thermos (cm)</strong></td>
<td><span class="azul-negrita">Ø6.5 x 24.7<br></span></td>
</tr>
<tr>
<td><strong>Print area (cm)</strong></td>
<td><span class="azul-negrita">20,8 x 19<br></span></td>
</tr>
<tr>
<td><strong>Presentation box (cm)</strong></td>
<td><span class="azul-negrita">7,7 x 25 x 7,7<br></span></td>
</tr>
<tr>
<td><strong>Weight (g)</strong></td>
<td><span class="azul-negrita">295<br></span></td>
</tr>
</tbody>
</table>
<p> </p>
<p class="enlace"><a id="saber-mas4"></a> </p>
<p><strong>RECOMMENDED INSTRUCTIONS AND PARAMETERS FOR SUBLIMATION PRINTING</strong></p>
<p><strong>WITH CUP PLATE</strong></p>
<ul>
<li>Print on design in <strong>mode</strong> <strong> mirror</strong></li>
<li>Preheat the press to <span class="azul-negrita">200 °C</span></li>
<li>Remove the lid and the base of the thermos flask</li>
<li>Place the paper with the printed design around the thermos flask and fix it with heat adhesive tape</li>
<li>Close the press with <strong>medium pressure</strong> for <span class="azul-negrita">35 seconds</span></li>
<li>With the help of a protective glove retirael thermos flask freshly printed</li>
<li>Carefully peel off the paper</li>
</ul>
<p><strong>WITH A SUBLIMATION OVEN</strong></p>
<ul>
<li>Print the design in <strong>mode</strong> <strong> mirror</strong></li>
<li>Heat the oven to<span class="azul-negrita"> 200 ºC</span></li>
<li>Remove the lid from the water bottle</li>
<li>Place the printed design around the thermos flask and secure it with heat tape</li>
<li>Place and tighten the bracket or insert the thermos flask into a heat shrink bag heat-shrinkable and peel it off with the heat gun. You can also use a silicone sheet</li>
<li>Sublime in the oven for <span class="azul-negrita">6-7 minutes</span></li>
<li>With the help of a protective glove, remove the thermos flask freshly sublimated</li>
<li>Carefully peel off the paper</li>
</ul>
<p> </p>
<p class="enlace"><a id="saber-mas5"></a> </p>
<p><strong>RELATED POST</strong></p>
<p><a href="https://www.brildor.com/blog/en/oven-sublimation-using-heat-shrink-bags/" target="_blank" rel="nofollow noopener">Oven sublimation using heat shrink bags</a></p>https://www.brildor.com/media/catalog/product/t/e/termo-500ml-acero-inoxidable-blanco-sublimacion-d1.jpg6.95instock6.956.9500000https://www.brildor.com/media/catalog/product/t/e/termo-500ml-acero-inoxidable-blanco-sublimacion-d1.jpg19997488554945150454/Blanks/Blanks/Water Bottles & Flasks/Blanks/Father's Day/Blanks/Father's Day/Water Bottles & Flasks/Blanks/Water Bottles & Flasks/Thermos Flasks2021-07-24T05:34:12+0000