More information about the Sublimable Stainless Steel Bottles

INDEX

> Description

> Things to keep in mind

> Characteristics

> Measurements

> Washing recommendations

> Recommended sublimation instructions and parameters

> Related posts

DESCRIPTION

• Suitable for food consumption. They do not transfer flavour to the drink
• Flat screw cap (Ref. 055294 and 056382) or dome (Ref. 038253 and 056445)
• Mouth size suitable for easy refilling and cleaning of the bottle
• All bottles have a glossy white sublimable coating, except Ref. 056382, which is matte
  
• White cardboard presentation box included
• Food consumption label attached to the base of the bottle. Easily removable (Ref. 038253)
• You can personalise the cylindrical area of the bottle with a mug press or for cylindrical objects
• They can also be personalised with other techniques such as laser engraving, screen printing, adhesive vinyl, DTF and UV printing

THINGS TO KEEP IN MIND

• Cap is not sublimable
• When sublimating with a press, keep the following in mind:
  • At the end of the pressing time, without removing the bottle from the press, rotate it and apply heat for 10 seconds more
  • This will allow the part of the design that remains on the sides of the paper to transfer evenly, just like the central area of the design
• If there are residues on the surface after removing the sublimation paper, you can remove them with a soft damp cloth. The bottle must be completely cold
• Although the box of the bottle with flat cap Ref. 055294 indicates it is 750 ml, its actual capacity is 650 ml
• Although the interior is resistant to oxidation, it is not resistant to corrosion. Avoid keeping acidic, fermented, or carbonated drinks inside for more than 24 hours. It is recommended to wash it after each use

CHARACTERISTICS

MEASUREMENTS

WASHING RECOMMENDATIONS

• Not suitable for use in dishwashers or microwaves
• Hand wash with warm water and soap
• Dry properly after each wash

RECOMMENDED SUBLIMATION INSTRUCTIONS AND PARAMETERS

Parameters indicated as guidelines. It is recommended to conduct prior tests to make necessary adjustments before starting production.

WITH MUG PRESS

• Print the design in mirror mode
• Heat the press to 180 ºC
• Remove the cap from the bottle
• Place the printed part of the paper on the bottle and secure them with heat-resistant tape
• Insert the bottle into the press
• Close the press with medium pressure for 60 seconds
• After the pressing time, rotate the bottle without removing it from the press and apply heat for 10 seconds more
• With the help of a protective glove, remove the freshly printed bottle
• Carefully remove the paper

WITH SUBLIMATION OVEN

• Print the design in mirror mode
• Heat the oven to 180 ºC
• Remove the cap from the bottle
• Place the printed design around the bottle and secure them with heat-resistant tape
• Place and adjust the clamp or, insert the bottle into a heat shrink bag and shrink with the gun. You can also use a silicone sheet
• Sublimate in the oven for 6 minutes
• With the help of a protective glove, remove the clamp, silicone sheet, or bag, as applicable
• Carefully remove the paper from the bottle

RELATED POSTS

Oven sublimation using heat shrink bags