Sublimable Glossy Skinny Tumblers
Sublimable Glossy Skinny Tumblers
Customisable 600 ml thermal tumblers by sublimation.
- 304 stainless steel
- Includes a reusable plastic straw and non-slip rubber to attach to the base
Related Products
More information about the Sublimable Glossy Skinny Tumblers
INDEX
> Recommended sublimation instructions and parameters
DESCRIPTION
- Cylindrical body with double wall to maintain the interior temperature
- Transparent plastic lid with silicone. Secures the lid to the mug body and prevents movement
- Sliding closure tab on the lid. Hole for placing the rigid plastic straw
- Includes black non-slip EVA foam with adhesive to stick on the base
- Suitable for sublimating over the entire exterior surface with a transfer press and sublimation oven
- Presented in a white cardboard box
THINGS TO KEEP IN MIND
- The straw hole tab does not seal hermetically. The mug should be kept in an upright position
- Although the interior is resistant to oxidation, it is not resistant to corrosion. Avoid keeping acidic, fermented, or carbonated drinks inside for more than 24 hours. It is recommended to wash it after each use
MEASUREMENTS
| Capacity (oz ≈ ml) | 20 ≈ 600 |
| Print area (cm) | 20 x 24 |
| Mug (cm) | Ø7.5 x 20.3 |
| Lid (cm) | Ø7 x 2.4 |
| Mouth (cm) | 0.8 x 2 |
| Straw (cm) | Ø0.7 x 26 |
| Weight (g) | 308 |
RECOMMENDED SUBLIMATION INSTRUCTIONS AND PARAMETERS
Parameters indicated as guidelines. It is recommended to conduct preliminary tests to make necessary adjustments before starting production.
WITH MUG PRESS
- Print the design in mirror mode
- Heat the press to 200º C
- Remove the lid from the mug
- Place the paper with the printed side on the mug and secure it with thermal adhesive tape
- Close the press with medium-high pressure for 180 seconds
- Using a protective glove, remove the freshly sublimated mug
- Carefully remove the paper
WITH SUBLIMATION OVEN
- Print the design in mirror mode
- Heat the press to 200º C
- Remove the lid from the mug
- Cover the base of the mug with thermal tape
- Place the printed design in mirror mode around the mug and secure it using thermal adhesive tape
- Adjust the clamp, or insert the mug into a shrink bag and shrink it with a heat gun. You can also use a silicone sheet
- Sublimate in the oven for 5 minutes
- Using a protective glove, remove the clamp, silicone sheet, or bag, as applicable
- Carefully remove the paper from the mug
- Cool using a fan or a tub of lukewarm water
RELATED POSTS
How to personalise thermal mugs and bottles with a mug sublimation machine
| Ref. | 953168 |
|---|---|
| Print area (mm) | 200 x 240 |
| Colour | White |
| Surface material | Stainless steel, Plastic |
| Items | Thermos |
| Accessory details | Straw, Cap |
| Marking techniques | Dye sublimation |
Reviews
Share your opinion
It will only take a minute, and your opinion can help other customers.
Sign in to submit your review
Write a review
Tania
Verified Buyer
8 Jan 2026
From Brildor Español
Diana
Verified Buyer
19 Dec 2025
From Brildor Español
Miguel silvestre
Verified Buyer
2 Oct 2025
From Brildor Español
Jessica
Verified Buyer
18 Jun 2025
From Brildor Español
Mauro Nicolás
Verified Buyer
12 Jun 2025
From Brildor Español
Ivan Dario
Verified Buyer
16 Apr 2025
From Brildor Español
Patricia
Verified Buyer
8 Feb 2025
From Brildor Español
Eva Raquel
Verified Buyer
18 Jan 2025
From Brildor Español
Questions
No questions found for this product.
Be the first to ask a question!
Ask a question