Cylindrical body with double wall: 304 stainless steel inside and 201 stainless steel outside. Keeps drink cold or hot for longer
Glitter outer surface that won't peel or fall off. Tactile texture
Transparent plastic snap-on lid with silicone ring prevents liquid leakage around the rims
Slide open hole in the lid for the stainless steel straw.
Includes non-slip rubber to place on the base
Can be personalised all over with a heat press machine using 6-9 oz mug heaters and a 3D sublimation oven
Delivered in a white cardboard box
THINGS TO KEEP IN MIND
The lid of the straw hole does not seal tightly. The tumbler must be kept upright
Before personalising the pink, gold and silver tumblers, be aware that these colours will blend in with the colours of the image you want to print, changing its tone. Choose designs with dark colours to minimise this effect
DIMENSIONS (APPROX.)
Capacity (ml)
20 oz ≈ 600
Tumbler (cm)
Ø7.3 x 21
Lid (cm)
Ø7.3 x 2.3
Opening (cm)
Ø.3
Straw (cm)
Ø0.6 x 26
Print area (cm)
24 x 19
Box (cm)
8 x 27.5 x 8
Weight (g)
324
Recommended instructions and parameters for sublimation printing
Parameters are given as a guide only. They may vary due to many factors, such as the type of sublimation paper, ink or ambient temperature. Therefore, testing is recommended.
WITH A MUG HEAT PRESS
Print the design in mirror image
Preheat the press to 200º C
Remove the lid from the tumbler
Hold the paper's printed side against the tumbler and fix it with heat-resistant tape
Press for 180 seconds, medium-heavy pressure
Remove the newly printed tumbler using a protective glove
Carefully peel off the paper
WITH A SUBLIMATION OVEN
Print the design in mirror image
Preheat the oven to 200º C
Remove the lid from the tumbler
Cover the base of the tumbler with heat-resistant tape
Hold the paper's printed side against the jar and fix it with heat-resistant tape
Adjust the wrap around it or slide the tumbler in a heat shrink bag and shrink with a heat gun. You can also use a silicone sheet
Sublimate inside the oven for 5 minutes
Using a protective glove, remove the wrap, the silicone sheet, or the bag, depending on the accessory you used
https://www.brildor.com/en/sublimation-water-bottle-straw-glitter-finish43691Sublimation Glitter Skinny Tumblers<p><a name="know-more"></a></p>
<h2>More information about the sublimation glitter skinny tumblers</h2>
<p> </p>
<p><strong>INDEX</strong></p>
<p>> <a href="#know-more1">Description</a></p>
<p>> <a href="#know-more2">Things to keep in mind</a></p>
<p>> <a href="#know-more3">Dimensions</a></p>
<p>> <a href="#know-more4">Recommended instructions and parameters for sublimation printing</a></p>
<p> </p>
<p><a name="know-more1"></a></p>
<p><strong>DESCRIPTION</strong></p>
<ul>
<li>Cylindrical body with double wall: <strong>304 stainless steel</strong> inside and <strong>201 stainless steel</strong> outside. Keeps drink cold or hot for longer</li>
<li>Glitter outer surface that won't peel or fall off. Tactile texture</li>
<li>Transparent plastic snap-on lid with silicone ring prevents liquid leakage around the rims</li>
<li>Slide open hole in the lid for the stainless steel straw.</li>
<li>Includes non-slip rubber to place on the base</li>
<li>Can be personalised all over with a heat press machine using <span class="azul-negrita">6-9 oz</span> mug heaters and a 3D sublimation oven</li>
<li>Delivered in a white cardboard box</li>
</ul>
<p> </p>
<p> </p>
<p><a name="know-more2"></a></p>
<p><strong>THINGS TO KEEP IN MIND<br></strong></p>
<ul>
<li>The lid of the straw hole does not seal tightly. The tumbler must be kept upright</li>
<li>Before personalising the pink, gold and silver tumblers, be aware that these colours will blend in with the colours of the image you want to print, changing its tone. Choose designs with dark colours to minimise this effect</li>
</ul>
<p> </p>
<p><a name="know-more3"></a></p>
<p><strong>DIMENSIONS (APPROX.)</strong></p>
<table>
<tbody>
<tr>
<td><strong>Capacity (ml)<br></strong></td>
<td><strong><span class="azul-negrita">20 oz ≈ 600<br></span></strong></td>
</tr>
<tr>
<td><strong>Tumbler (cm)<br></strong></td>
<td><strong><span class="azul-negrita">Ø7.3 x 21 <br></span></strong></td>
</tr>
<tr>
<td><strong>Lid (cm)<br></strong></td>
<td><strong><span class="azul-negrita">Ø7.3 x 2.3 <br></span></strong></td>
</tr>
<tr>
<td><strong>Opening (cm)<strong><br></strong></strong></td>
<td><span class="azul-negrita">Ø.3<br></span></td>
</tr>
<tr>
<td><strong>Straw (cm)<br></strong></td>
<td><span class="azul-negrita">Ø0.6 x 26<br></span></td>
</tr>
<tr>
<td><strong>Print area (cm)</strong></td>
<td><span class="azul-negrita">24 x 19<br></span></td>
</tr>
<tr>
<td><strong>Box (cm)</strong></td>
<td><span class="azul-negrita">8 x 27.5 x 8<br></span></td>
</tr>
<tr>
<td><strong>Weight (g)<br></strong></td>
<td><span class="azul-negrita">324<br></span></td>
</tr>
</tbody>
</table>
<p> </p>
<p><a name="know-more4"></a></p>
<h2>Recommended instructions and parameters for sublimation printing</h2>
<p>Parameters are given as a guide only. They may vary due to many factors, such as the type of sublimation paper, ink or ambient temperature. Therefore, testing is recommended.</p>
<p> </p>
<p><strong>WITH A MUG HEAT PRESS</strong></p>
<ul>
<li>Print the design in <strong>mirror image</strong></li>
<li>Preheat the press to <span class="azul-negrita">200º C</span></li>
<li>Remove the lid from the tumbler</li>
<li>Hold the paper's printed side against the tumbler and fix it with heat-resistant tape</li>
<li>Press for <span class="azul-negrita">180 seconds</span>, <strong>medium-heavy</strong> pressure</li>
<li>Remove the newly printed tumbler using a protective glove</li>
<li>Carefully peel off the paper</li>
</ul>
<p><strong>WITH A SUBLIMATION OVEN</strong></p>
<ul>
<li>Print the design in <strong>mirror image</strong></li>
<li>Preheat the oven to <span class="azul-negrita">200º C</span></li>
<li>Remove the lid from the tumbler</li>
<li>Cover the base of the tumbler with heat-resistant tape</li>
<li>Hold the paper's printed side against the jar and fix it with heat-resistant tape</li>
<li>Adjust the wrap around it or slide the tumbler in a heat shrink bag and shrink with a heat gun. You can also use a silicone sheet</li>
<li>Sublimate inside the oven for <span class="azul-negrita">5 minutes</span></li>
<li>Using a protective glove, remove the wrap, the silicone sheet, or the bag, depending on the accessory you used</li>
<li>Carefully remove the paper from the tumbler</li>
<li>Cool using a fan or a bucket with lukewarm water</li>
</ul>https://www.brildor.com/media/catalog/product/v/a/vasos-termo-sublimacion-acabado-glitter-d1.jpg8.95instock08.95000https://www.brildor.com/media/catalog/product/v/a/vasos-termo-sublimacion-acabado-glitter-d1.jpg2296127666277582812036644367504364048350520755316853915/Blanks/Blanks/Beer Steins & Tumblers/Blanks/Beer Steins & Tumblers/Tumblers & Cups/Blanks/Thermos Flasks/Blanks/Mugs, Beer Steins & Tumblers2022-02-25T09:23:43+0000
