More information about the glitter inner sublimation mug

• Mug with an attractive and eye-catching design, ideal as a souvenir and for events and celebrations such as weddings, communions, christenings, stag parties and more
• Glitter-like effect on the inside. It has a microparticle coating that shines when it comes in contact with light
• Available in two cylindrical models with a shiny silver and gold finish
• Printable on all its outer surface
• Suitable for personalising with a heat press machine using 11 oz heating elements Including a sublimation oven using clamps, silicone sheets or heat shrink bags
• In Related Products, you will find some models of boxes that can be purchased separately

THINGS TO KEEP IN MIND

• Not microwave-safe as it is metallic

DIMENSIONS (APPROX.)

Recommended instructions and parameters for sublimation printing

Parameters are given as a guide only. They may vary due to many factors such as the paper used, inks or ambient temperature. Therefore, testing is recommended.

WITH A MUG HEAT PRESS

• Print the design in mirror image
• Preheat the oven to 180ºC
• Hold the paper's printed side against the mug and fix it with heat-resistant tape
• Press for 200 seconds, medium-heavy pressure
• Remove the newly printed mug using a protective glove
• Carefully peel off the paper

WITH A SUBLIMATION OVEN

• Print the design in mirror image
• Preheat the oven to 180ºC
• Hold the paper's printed side against the mug and fix it with heat-resistant tape
• Adjust the clamp, or place the mug in a heat shrink bag and heat it with a heat gun. Make sure you get rid of all the wrinkles. You can also use a silicone sheet
• Sublimate in the oven for 13-15 minutes
• Using a protective glove, remove the wrap, the silicone sheet, or the bag, depending on the accessory you used
• Carefully peel off the paper from the mug