More information about the Sublimable Acrylic Panels

INDEX

> Description

> Things to keep in mind

> Tips and advice

> Dimensions

> Recommended sublimation instructions and parameters

DESCRIPTION

• White sublimable reverse (direct mode). Transparent non-sublimable front
• The image can be seen through the glossy transparent side with a 3D effect
• Suitable for working with CO2 laser engraving and cutting machines
• By combining sublimation, laser engraving, and LED lighting, you can create luminous and dynamic designs
• Can also be customised with screen printing, UV DTF, adhesive vinyl, and UV printing

THINGS TO KEEP IN MIND

• They have protective plastic on both sides. It must be removed before customisation

TIPS AND ADVICE

• Create lamps by combining the panel with some of our LED light bases (see Related Products)

DIMENSIONS

RECOMMENDED SUBLIMATION INSTRUCTIONS AND PARAMETERS

Parameters indicated as guidelines. It is recommended to conduct preliminary tests to make necessary adjustments before starting production.

• Print the design in direct mode
• Heat the press to 180 ºC
• Remove the transparent plastic film covering each side of the panel
• Place the panel on the base of the press and the printed side of the paper on the white side. Secure them with heat-resistant adhesive tape
• Close the press with medium-low pressure for 90 seconds
• Using a protective glove, remove the freshly printed panel
• Carefully remove the paper