The store will not work correctly in the case when cookies are disabled.
The legal stuff about cookies:
This message requires us to tell you about our cookie policy. If you continue browsing, we'll assume you accept it and think it's okay.
Don't worry, this message only comes up once.
Self Adhesive Vinyl Rolls for sublimation and laser printing - Washaffix
Washaffix sticky-backed vinyl you can personalise using dye sublimation and laser printing. Excellent for decoration, advertising, and sign making designs.
White, opaque, with a matte finish.
Suitable for non-porous, smooth or slightly irregular surfaces.
Sale units: 1 m, 5 m and 30 m rolls with a width of 50 cm, and 3 m and 30 m rolls with a width of 100 cm
More information about the Washaffix self-adhesive vinyl for sublimation and laser printing
Perfect for giving a new look to doors and furniture, decorating car windows, and many more.
This vinyl can be printed using 2 different methods: directly with a laser printer or using dye sublimation printing. Also, you can sublimate it either before or after sticking it to the surface of the object to be personalised.
Printable using dry toner (both monochrome and colour), white toner, LED technology or flash fusing.
It can be applied on rigid surfaces such as ceramic, wood, plastic, glass, and aluminium.
Permanent, highly resistant acrylic adhesive.
Waterproof and grease repellent.
Can be cut with any vinyl cutter.
Durable since it does not absorb any water and has a high fixing capacity.
Dishwasher safe at temperatures below 60ºC
18 months shelf life upon delivery, provided storage, use, and printing conditions are met.
In Related Products, you will find this vinyl in A4 and A3 sheets.
THINGS TO KEEP IN MIND
Avoid using microwaves on glasses, mugs, or plates personalised with Washaffix.
If you’re using a Silhouette Cameo vinyl cutter, the recommended cutting parameters for this vinyl are the following: blade setting (2), speed (2), force (20) and number of passes (1).
Using a squeegee when applying the vinyl will help you avoid the formation of air bubbles. You will find some options in Related Products.
DIMENSIONS
Reference nº
038663
038657
038656
038655
038654
Format
Roll
Roll
Roll
Roll
Roll
Dimensions
50 cm x 1 m
50 cm x 5 m
50 cm x 30 cm
100 cm x 3 m
100 cm x 30 m
Thickness
60 μ
60 μ
60 μ
60 μ
60 μ
Grammage
140 gsm
140 gsm
140 gsm
140 gsm
140 gsm
STORAGE CONDITIONS, PRINTING LOCATION AND USE
Temperature
Relative humidity
Print room
10ºC - 30ºC
40% - 55%
Use
-40ºC - 60ºC
10% - 100%
Storage
10ºC - 20ºC
20% - 55%
How to personalise and apply Washaffix vinyl?
SUBLIMATION BEFORE APPLICATION: RECOMMENDED INSTRUCTIONS AND PARAMETERS
Print the design in mirror image, using sublimation paper.
Preheat the press to 200ºC.
Place the Washaffix vinyl with its printable side facing up and the printed design against it, so they come in direct contact with each other. Cover them with protective paper.
Press for 50 seconds, very heavy pressure (6 bar).
Remove the protective paper and the printed Washaffix vinyl.
If needed, cut the design with a vinyl cutter, scissors or a cutter.
Slightly peel the design off its backing at one end, but enough so that it sticks to the vinyl to begin its application.
Gradually place the vinyl on the target surface. Use a felt squeegee to avoid the formation of air bubbles.
SUBLIMATION AFTER APPLICATION: RECOMMENDED INSTRUCTIONS AND PARAMETERS
Cut and stick the Washaffix vinyl to the object you want to personalise.
If necessary, use heat-resistant tape to protect the parts of the item that may get damaged by heat.
Print the design in mirror image, using sublimation paper.
Preheat the press to 190ºC.
Place the item on the press’ lower platen, with the vinyl to be printed facing up.
Place the previously printed design on the vinyl.
Press for 35 seconds, heavy pressure.
Using a protective glove, remove the item with the newly printed vinyl.
Remove the paper carefully.
LASER PRINTING
You can use any laser printer: standard or white toner, with LED technology or flash fusing.
Select the paper type in your printer: “Transparency” or the most suitable option according to the thickness and grammage of this vinyl.
Place the Washaffix roll in the printer.
Print the design on the vinyl.
Cut the outline of the design using scissors or a vinyl cutter.
Remove the excess media, leaving on the liner the design you want to stick to the item.
Slightly peel the design off its backing at one end, but enough so that it sticks to the vinyl to begin its application.
Gradually place the vinyl on the target surface. Use a squeegee to avoid the formation of air bubbles.