Round Badges Ø37mm
Round Badges Ø37mm
Round metal badges for personalisation.
- Different backs: pin and magnet
- Ø37 mm circular mould compatible with these assembly machines, sold separately
Related Products
More information about the Ø37mm round badges
INDEX
> Compatibility with badge machines
> How to customise Ø37 mm round badges?
DESCRIPTION
- Highly durable chrome steel mould
- 1 complete badge consists of:
- 1 transparent protective Mylar sheet (acetate)
- 1 front metal plate for placing the design
- 1 rear metal plate, which varies depending on the model
THINGS TO KEEP IN MIND
- Compatible with any assembly machine, as long as the badge shape and size match
- The magnet for magnetic badges is supplied separately. It comes with adhesive to attach it to the back plate
- Each bag of badges includes 20 or 200 complete badge sets (front + back + acetate)
- The moulds are only compatible with the following badge machines: Evolution, Automatic Electric and Pneumatic (Ref. 038068, discontinued)
COMPATIBILITY WITH BADGE MACHINES
| Back plate | Economical | Button Press We R | Evolution | Automatic Electric | Pneumatic (038068)* |
| Pin | ✗ | ✔ | ✔ | ✔ | ✔ |
| Magnet | ✗ | ✔ | ✔ | ✔ | ✔ |
*Machine discontinued.
TEMPLATES FOR CUSTOMISATION
To view the templates, open the PDF file using Photoshop. Remember to enable the layers:
Round badge templates (.pdf - 5.4MB)
HOW TO CUSTOMISE Ø37 MM ROUND BADGES?
STEP 1: Print the design
- Always use a template with cut and bleed guides
- Ensure the design has a margin for folding
- Print on 100–110 g/m² paper for an optimal finish
STEP 2: Cut out the design
- Cut along the outermost edge of the template
- You can use scissors, a die cutter, or a plotter, depending on the volume and precision required
STEP 3: Assemble the badge
- Install the circular mould of Ø37 mm
- Part A of the mould:
- Place the front plate (sharp edge facing down)
- Position the cut-out design on top
- Add the Mylar sheet
- Rotate the base to align Part A with the top section
- Press the lever and lift it back up
- Part B of the mould:
- Place the back plate with the sharp edge facing up, aligning it with the pin
- Rotate the base to align it with the top section
- Press the lever again
- Your badge is now ready
- For the magnet model, attach the magnet to the back of the badge
RELATED POSTS
Custom badges: how to make them, ideas and tips
| Ref. | 955635 |
|---|
Reviews
Share your opinion
It will only take a minute, and your opinion can help other customers.
Questions
No questions found for this product.
Be the first to ask a question!