Laser Transfer Paper - Multi-Trans PRO by Forever
Laser Transfer Paper - Multi-Trans PRO by Forever
Printable transfer sheets for use with laser printers.
- Suitable for customising rigid surfaces, both smooth and porous
- Matte finish
More information
https://www.brildor.com/en/laser-transfer-paper-multi-trans-pro-forever
50261
Laser Transfer Paper - Multi-Trans PRO by Forever
<p><a name="know-more"></a></p>
<h2>More information about Laser Transfer Paper - Multi-Trans PRO by Forever</h2>
<p> </p>
<p><strong>CONTENTS</strong></p>
<p>> <a href="#know-more1">Description</a></p>
<p>> <a href="#know-more2">Things to keep in mind</a></p>
<p>> <a href="#know-more3">Application parameters</a></p>
<p>> <a href="#know-more4">Application instructions</a></p>
<p>> <a href="#know-more5">Technical data sheet</a></p>
<p>> <a href="#know-more6">Related posts</a></p>
<p><a id="know-more1"></a> </p>
<p><strong>DESCRIPTION</strong></p>
<ul>
<li>The design printed on the paper and then transferred to the surface will have a <strong>matte finish</strong></li>
<li><strong>Printable</strong> on the side opposite to the watermark</li>
<li>Suitable for <strong>laser printers with LED technology</strong> using white, black or CMYK toner</li>
<li>Can be applied to surfaces <strong>without polyester coating</strong></li>
<li>Applicable to <strong>almost any material:</strong> wood, cardboard, glass, plastic, ceramic, paper, etc.</li>
</ul>
<p><a id="know-more2"></a> </p>
<p><strong>THINGS TO KEEP IN MIND</strong></p>
<ul>
<li>It is recommended to print with white toner on dark backgrounds to improve colour fidelity</li>
<li>Use a silicone sheet to distribute heat evenly across the entire surface</li>
<li>It is advisable to carry out preliminary tests before starting production</li>
<li>Optimal results are achieved when applying Multi-Trans PRO with the Uninet laser printer</li>
</ul>
<p><a id="know-more3"></a> </p>
<p><strong>APPLICATION PARAMETERS<br /></strong></p>
<ul>
<li>Peeling of Multi-Trans PRO printed in CMYK should be done when warm, <strong>except for aluminium surfaces, which should be peeled hot</strong></li>
<li>Peeling of Multi-Trans PRO printed in CMYW should be done hot</li>
</ul>
<table>
<tbody>
<tr>
<td> </td>
<td>
<p style="text-align: center;"><strong>Temperature<br />(°C)</strong></p>
</td>
<td>
<p style="text-align: center;"><strong>Pre-press<br />time (s)</strong></p>
</td>
<td>
<p style="text-align: center;"><strong>Pressing<br />time (s)</strong></p>
</td>
<td style="text-align: center;"><strong>Pressure</strong></td>
</tr>
<tr>
<td>
<p><strong>Thin wood<br /></strong><strong>(Thickness 0.3 cm)</strong></p>
</td>
<td style="text-align: center;"><span class="azul-negrita">135</span></td>
<td style="text-align: center;"><span class="azul-negrita">25</span></td>
<td style="text-align: center;"><span class="azul-negrita">30</span></td>
<td style="text-align: center;">Medium/High</td>
</tr>
<tr>
<td>
<p><strong>Thick wood<br /></strong><strong>(Thickness 1.6 cm)</strong></p>
</td>
<td style="text-align: center;"><span class="azul-negrita">135</span></td>
<td style="text-align: center;"><span class="azul-negrita">90</span></td>
<td style="text-align: center;"><span class="azul-negrita">30</span></td>
<td style="text-align: center;">Medium/High</td>
</tr>
<tr>
<td><strong>Paper</strong></td>
<td style="text-align: center;"><span class="azul-negrita">135</span></td>
<td style="text-align: center;"><span class="azul-negrita">2</span></td>
<td style="text-align: center;"><span class="azul-negrita">5-10</span></td>
<td style="text-align: center;">Medium/High</td>
</tr>
<tr>
<td><strong>Cards</strong></td>
<td style="text-align: center;"><span class="azul-negrita">135</span></td>
<td style="text-align: center;"><span class="azul-negrita">2</span></td>
<td style="text-align: center;"><span class="azul-negrita">15-20</span></td>
<td style="text-align: center;">Medium/High</td>
</tr>
<tr>
<td><strong>Aluminium</strong></td>
<td style="text-align: center;"><span class="azul-negrita">135</span></td>
<td style="text-align: center;"><span class="azul-negrita">0</span></td>
<td style="text-align: center;"><span class="azul-negrita">90</span></td>
<td style="text-align: center;">High</td>
</tr>
<tr>
<td><strong>Glass</strong></td>
<td style="text-align: center;"><span class="azul-negrita">135</span></td>
<td style="text-align: center;"><span class="azul-negrita">45</span></td>
<td style="text-align: center;"><span class="azul-negrita">45-60</span></td>
<td style="text-align: center;">High</td>
</tr>
<tr>
<td><strong>Leather</strong></td>
<td style="text-align: center;"><span class="azul-negrita">135</span></td>
<td style="text-align: center;"><span class="azul-negrita">5</span></td>
<td style="text-align: center;"><span class="azul-negrita">10-15</span></td>
<td style="text-align: center;">Medium</td>
</tr>
<tr>
<td><strong>Cork <sup>(*)</sup></strong></td>
<td style="text-align: center;"><span class="azul-negrita">135</span></td>
<td style="text-align: center;"><span class="azul-negrita">30</span></td>
<td style="text-align: center;"><span class="azul-negrita">35</span></td>
<td style="text-align: center;">Medium/High</td>
</tr>
<tr>
<td><strong>Mugs</strong></td>
<td style="text-align: center;"><span class="azul-negrita">160</span></td>
<td style="text-align: center;"><span class="azul-negrita">0</span></td>
<td style="text-align: center;"><span class="azul-negrita">60</span></td>
<td style="text-align: center;">High</td>
</tr>
<tr>
<td><strong>Mirrors</strong></td>
<td style="text-align: center;"><span class="azul-negrita">135</span></td>
<td style="text-align: center;"><span class="azul-negrita">45</span></td>
<td style="text-align: center;"><span class="azul-negrita">45-60</span></td>
<td style="text-align: center;">High</td>
</tr>
<tr>
<td><strong>Coasters</strong></td>
<td style="text-align: center;"><span class="azul-negrita">135</span></td>
<td style="text-align: center;"><span class="azul-negrita">2</span></td>
<td style="text-align: center;"><span class="azul-negrita">15-20</span></td>
<td style="text-align: center;">Medium/High</td>
</tr>
<tr>
<td><strong>Napkins</strong></td>
<td style="text-align: center;"><span class="azul-negrita">135</span></td>
<td style="text-align: center;"><span class="azul-negrita">2</span></td>
<td style="text-align: center;"><span class="azul-negrita">5-10</span></td>
<td style="text-align: center;">Medium</td>
</tr>
<tr>
<td>
<p><strong>Plastic cups </strong><strong>(PP)</strong></p>
</td>
<td style="text-align: center;"><span class="azul-negrita">110</span></td>
<td style="text-align: center;"><span class="azul-negrita">0</span></td>
<td style="text-align: center;"><span class="azul-negrita">180</span></td>
<td style="text-align: center;">Medium</td>
</tr>
<tr>
<td>
<p><strong>Book covers<br /></strong><strong>(uncoated)</strong></p>
</td>
<td style="text-align: center;"><span class="azul-negrita">135</span></td>
<td style="text-align: center;"><span class="azul-negrita">20</span></td>
<td style="text-align: center;"><span class="azul-negrita">30-35</span></td>
<td style="text-align: center;">Medium</td>
</tr>
</tbody>
</table>
<p><sup>(*)</sup> <span style="font-size: 10pt;">Requires a third pressing at <span class="azul-negrita">135 °C</span> for <span style="color: #4a90e2; font-weight: bold;">2-5 s</span>, without applying pressure</span></p>
<p><a id="know-more4"></a> </p>
<p><strong>APPLICATION INSTRUCTIONS</strong></p>
<p><strong>HEAT PRESS FOR CYLINDRICAL OBJECTS</strong></p>
<ul>
<li>Ensure the product surface is clean</li>
<li>Heat the press to the recommended temperature</li>
<li>Pre-press the material as indicated in the application parameters</li>
<li>Print the design onto the transfer paper in <strong>mirror mode</strong>. Use the transparency or label option</li>
<li>Place the Multi-Trans PRO paper onto the object</li>
<li>Secure the paper with heat-resistant tape</li>
<li>Place protective paper over the design</li>
<li>Cover the protective paper with a silicone sheet</li>
<li>Open the press and insert the cylindrical object with the design</li>
<li>Close and press according to the application parameters<span class="azul-negrita"><br /></span></li>
<li>Open the press and allow the object to cool</li>
<li>Peel off slowly and evenly</li>
<li>If any adhesive residue remains after application, remove it manually</li>
<li>Allow to dry for <span class="azul-negrita">24 h</span> to fix the design</li>
</ul>
<p><strong>HEAT PRESS FOR FLAT OBJECTS<br /></strong></p>
<ul>
<li>Ensure the product surface is clean</li>
<li>Print the design onto the transfer paper in <strong>mirror mode.</strong> Use the transparency or label option in the rigid objects profile</li>
<li>Heat the press to the recommended temperature<span class="azul-negrita"><br /></span></li>
<li>Pre-press the material if necessary as indicated in the application parameters</li>
<li>Remove the material</li>
<li>Place protective paper on the base plate</li>
<li>Place the item to be printed in the press</li>
<li>Centre the Multi-Trans PRO paper on the surface</li>
<li>Secure the paper with heat-resistant tape</li>
<li>Place another protective paper over the design</li>
<li>Cover the protective paper with a silicone sheet</li>
<li>Close and press according to the application parameters</li>
<li>Once finished, peel off the Multi-Trans PRO paper</li>
<li>If any adhesive residue remains after application, remove it manually</li>
</ul>
<p><a id="know-more5"></a> </p>
<p><strong>TECHNICAL DATA SHEET</strong></p>
<p><a href="https://drive.google.com/file/d/1bJ8OMrWarXZDI4_pj_ZkFRRVfVAzze4J/view" target="_blank" rel="noopener">Technical data sheet for laser transfer sheets - Multi-Trans PRO by Forever (.pdf 0.78 MB)</a></p>
<p><a id="know-more6"></a> </p>
<p><strong>RELATED POSTS</strong></p>
<p><a href="https://www.brildor.com/blog/es/personaliza-rigidos-con-papel-transfer-laser-facil-y-economico/" target="_blank" rel="noopener">Customise rigid items with Laser Transfer Paper: easy and economical</a></p>
<p><a href="https://www.brildor.com/blog/es/uninet-la-impresora-de-toner-blanco-mas-completa/" target="_blank" rel="noopener">Uninet, the most complete white toner printer</a></p>
https://www.brildor.com/media/catalog/product/l/a/laminas-transfer-laser-multi-trans-pro-forever.jpg
7.9
instock
0
7.9
0
0
0
https://www.brildor.com/media/catalog/product/l/a/laminas-transfer-laser-multi-trans-pro-forever.jpg
15661
20392
42839
/Transfer Paper
/Transfer Paper /White Toner Transfer Paper
/Transfer Paper /Transfer Paper for Rigid Surfaces
2023-06-21T05:50:20+0000
