Interchangeable Base Plates for Heat Presses

INDEX

> Description

> Compatible heat presses

> Points to consider

> Measurements

DESCRIPTION

• Compatible with the heat presses shown in this table
• They allow for printing on specific areas of the garment, avoiding contact with seams, zips, or buttons
• They make it easier to customise small or specially shaped surfaces
• Easy to remove and assemble via an anchoring system, without the need for additional tools
• Made of cast aluminium. Silicone or Open Cell pads

Heated Lower Platen (Ref. 05670)

• Dimensions: 38 x 38 cm
• Turns your heat press into a dual press. By applying heat from both sides, pressing time is reduced
• Facilitates transfers onto thick or multi-layered materials, making it suitable for 3D vinyl, patches, and other voluminous materials
• Independent time and temperature controller allows you to set different values from the main platen of the press
• Includes a Teflon cover and a 38 x 38 cm protective silicone pad

Labels (Ref. 036186)

• Dimensions: 12 x 12 cm
• Makes it easy to print on small fabrics such as patches, fabric labels, handkerchiefs, etc.

1 sleeve (Ref. 036188)

• Dimensions: 12 x 45 cm
• Suitable for placing t-shirt sleeves and printing on them in their entirety
• The elongated shape allows for working on narrow areas without affecting the rest of the garment

Trousers (Ref. 036187)

• Dimensions: 18 x 38 cm
• Suitable for any leg length

Small garments (Ref. 036189)

• Dimensions: 30 x 35 cm
• Customise small garments, baby clothes, bandanas... or rigid items

Trainers (Ref. 036190)

• Dimensions: 14 x 34 cm
• Allows you to customise 2 trainers at once

Round plates (Ref. 053435)

• Dimensions: Ø18 x 2 cm
• Suitable for printing on flat plates up to Ø18 cm
  

Caps (Ref. 053437)

• Dimensions: 38 x 38 cm
• Perfect for printing 4 caps at the same time
• Curved shape that adapts to the front for uniform pressing

T-shirts (Ref. 053436)

• Dimensions: 40 x 50 cm
• T-shirt shaped structure
• Space for printing the label inside the t-shirt

Polo shirts (Ref. 055428)

• Dimensions: 40 x 50 cm
• Slot to position the buttons and collar of the shirts
• Shape with a slot to position the buttons and collar of the shirts

2 sleeves (Ref. 055430)

• Dimensions: 40 x 50 cm
• Makes it easy to print 2 sleeves at once
• The elongated shape allows you to work on narrow areas without affecting the rest of the garment
• Teflon cover included

4-in-1 (Ref. 056313)

• Dimensions: 40 x 50 cm
• Platen with grooves for printing garments with zips or buttons
• 2 spaces to place labels inside the garment
• Shape with a rounded neck to be able to place polo shirts

Can coolers (Ref. 053438)

• Dimensions: 40 x 50 cm
• You can customise 8 can coolers, or similar, at the same time
• Without silicone pad to facilitate full printing of the coolers

Drying platen (Ref. 053592)

• Dimensions: 40 x 50 cm
• For use in techniques such as drying DTG and screen printing inks or curing in DTF and DTG
• Iron structure with ventilation holes and a porous foam pad that facilitates breathability

COMPATIBLE HEAT PRESSES

The base platens are easily attached to the pull-out platen of the press. On some models, it is necessary to remove the adapter from the back and fix the platen directly to the press using the same screws.

POINTS TO CONSIDER

• All base platens include a pad except for the base platen Ref. 053438

MEASUREMENTS