Loading..

Product was successfully added to your shopping cart.

Chemica DuoFlex® Heat Transfer Vinyl

Chemica DuoFlex® Heat Transfer Vinyl

  • Chemica DuoFlex® Heat Transfer Vinyl - Example of application
  • Chemica DuoFlex® Heat Transfer Vinyl - Colours available
  • Chemica DuoFlex® Heat Transfer Vinyl - Outline and filling texture details
  • Chemica DuoFlex® Heat Transfer Vinyl - Two options: black/white and white/black
  • Chemica DuoFlex® Heat Transfer Vinyl - References per size and colour
  • Chemica DuoFlex® Heat Transfer Vinyl - References per size and colour

Chemica DuoFlex® Heat Transfer Vinyl

Dual-layer heat transfer vinyl designed for 3D creations with a coloured outline. Its bottom layer slightly expands over the other layer during heat transfer, creating the outline of the design.

  • Made of polyurethane with matte finish. Available in white, combined with different colours.
  • Suitable for fabrics made of cotton, polyester, acrylic and similar fibres.
  • Sale unit: 1 m roll with a width of 25 cm, and 10 m roll with a width of 50 cm

More information

How to apply this HTV?

+ Read More
- Read Less
Availability: Shown on each product
  • Immediate:
Is our availability not enough? Ask to be notified of upcoming entries.

REQUEST NOTICE

SELECT
Colour Reference Availability Qty.
Black/White
  • Immediate: 2 units
  • We can also ship 20 in 2 working days
White/Black
  • Immediate: 19 units
  • We can also ship 20 in 2 working days
White/Red
  • Immediate: 35 units
  • We can also ship 20 in 2 working days
White/Blue
  • Immediate: 14 units
White/Yellow
  • Immediate: 10 units
  • We can also ship 20 in 2 working days
White/Green
  • Immediate: 7 units
  • We can also ship 20 in 2 working days
Colour Reference Availability Qty.
Black/White

On request, 15 working days after confirmation

White/Black

On request, 15 working days after confirmation

White/Red

On request, 15 working days after confirmation

Blanco/Azul

On request, 15 working days after confirmation

White/Yellow

On request, 15 working days after confirmation

White/Green

On request, 15 working days after confirmation

VAT not included

Discounts by quantity
  • Buy 1 for 9,9 € each / 25cm x 1m rolls
  • Buy 1 for 139 € each / 50cm x 10m rolls

Get free € to redeem on your next order by buying these products. Discover the Brildor Loyalty Program

Brildor Club is a direct discount program for your purchases. Whenever you place an order (minimum purchase of €10), some discount balance will be generated into your customer account for you to use on your next purchase. The more you buy, the more you save.
You will get access to the Brildor Club as soon as you register as a new customer, and will receive a €5 welcome balance.

 

How do I get some discount balance?


As a Regular Brildor Member:

  • On orders up to €180, you may receive €0.20 for every €10 you spend
  • On orders over €180, you may receive €0.30 for every €10 you spend
  • We will give you an extra €10 if you make 10 purchases over €100


As a Premium Brildor Member:

If you are a Premium Member of the Brildor Club, you will accumulate 25% more balance, so you can obtain:

  • On orders up to €180, you may receive €0.25 for every €10 you spend
  • On orders over €180, you may receive €0.375 for every €10 you spend

  

Who are Premium Brildor Members?


If over the last 12 months your purchases have exceeded €3,000, you will automatically be upgraded to the Premium Brildor Member category. This amount is checked daily. As soon as you reach it, you will become a Premium Member the day after.

 

Terms and conditions of the Brildor Club

  • Loyalty balance will be added when placing an order with an immediate payment method (Credit/debit card, Paypal and Pagantis).
  • Your balance will show in the "Your credit" section inside "Your account", and you can use it by selecting "Payment methods".
  • You can use your balance without needing to have a minimum accumulated amount or reach a minimum order value. Nonetheless, you won't be able to get a higher discount than your order value.
  • Balance expires after 6 months without making any purchase.
  • The balance is calculated on the net amount of the purchase: excluding taxes, shipping, coupons, and promotional discounts.
  • The cancellation of an order implies the loss of the balance generated in that purchase.
  • On a full-order return, the amount to be refunded will be the amount paid by the customer.
  • If the return of the order is due to causes beyond the control of Brildor, the redeemed balance won't be restored. However, the balance generated with this purchase won't be removed.
Chemica DuoFlex® Heat Transfer Vinyl Description

More information about the Chemica DuoFlex® heat transfer vinyl

  • Perfect for garment personalisation like caps, varsity jackets, hoodies or sports uniforms.
  • Very smooth surface, soft to the touch.
  • Easy application, no additional steps.
  • Composed of two layers: a white one and another in the chosen colour.
  • The bottom layer, or colour layer, will be the outline of your design. When applied to the garment, the design will have a coloured outline with a white filling. The only exception happens with Black/White vinyl. In this case, the design will have a white outline and a black filling.
  • The white layer (or top layer) contains the backing of the vinyl, which will also work as a carrier sheet. When using Black/White vinyl, the support lays on the black layer.
  • Cut the vinyl on the side with no backing.
  • Not printable.

TECHNICAL DETAILS

Material Matte polyurethane
Grammage 460 μ
Backing Clear polyester (self-adhesive)
Applies on Cotton, polyester, acrylic and similar fibres
Cutting blade 60º (Flock or Deep-Point blade)
Cutting mode Mirrored

STORAGE

  • 1 year max.
  • In a dry room (15º-30ºC).
  • Away from sunlight.
  • Placed vertically.

WASHING

  • Personalised garments should be washed inside out at a maximum temperature of 40ºC
  • Avoid the use of aggressive products. It is preferable to use a gentle detergent for delicates.
  • This vinyl has not been tested for resistance to tumble drying and dry cleaning; therefore, we do not recommend it.

WARNING

  • Personalised garments must be ironed inside out.
  • Wait 24 hours after application before washing it for the first time
  • Read and follow the garments’ washing instructions.

Recommended instructions and application parameters

  • Place the vinyl in the vinyl cutter and cut it in mirror mode. We recommend using a flock blade (60º). Remember to cut on the coloured side of the vinyl, the one without the backing. Only the Black/White vinyl must be cut on its white side because its backing is on the black layer.
  • Weed the vinyl by removing the excess material left around the design after cutting it. We recommend that you start from one corner, pulling up the excess HTV with one hand while holding down the backing with the other hand. This must be done very carefully, slowly but steadily. For very detailed designs, it is advisable to weed the vinyl with tweezers. When finished, the design will be visible on the backing.
  • Preheat the press to 165ºC.
  • Place the garment you want to personalise on the press’ platen.
  • Prepress for a few seconds to make sure you remove all of the wrinkles.
  • Position the vinyl on the garment. The bottom layer (colour layer) should be in direct contact with the garment.
  • Cover with protective paper and press for 20 seconds, low pressure.
  • Peel the backing from the design after letting it cool completely.

Additional Information
Reference nº 925 852
Post your question

Questions and Answers

There are no entries.

Chemica DuoFlex® Heat Transfer Vinyl Description

More information about the Chemica DuoFlex® heat transfer vinyl

  • Perfect for garment personalisation like caps, varsity jackets, hoodies or sports uniforms.
  • Very smooth surface, soft to the touch.
  • Easy application, no additional steps.
  • Composed of two layers: a white one and another in the chosen colour.
  • The bottom layer, or colour layer, will be the outline of your design. When applied to the garment, the design will have a coloured outline with a white filling. The only exception happens with Black/White vinyl. In this case, the design will have a white outline and a black filling.
  • The white layer (or top layer) contains the backing of the vinyl, which will also work as a carrier sheet. When using Black/White vinyl, the support lays on the black layer.
  • Cut the vinyl on the side with no backing.
  • Not printable.

TECHNICAL DETAILS

Material Matte polyurethane
Grammage 460 μ
Backing Clear polyester (self-adhesive)
Applies on Cotton, polyester, acrylic and similar fibres
Cutting blade 60º (Flock or Deep-Point blade)
Cutting mode Mirrored

STORAGE

  • 1 year max.
  • In a dry room (15º-30ºC).
  • Away from sunlight.
  • Placed vertically.

WASHING

  • Personalised garments should be washed inside out at a maximum temperature of 40ºC
  • Avoid the use of aggressive products. It is preferable to use a gentle detergent for delicates.
  • This vinyl has not been tested for resistance to tumble drying and dry cleaning; therefore, we do not recommend it.

WARNING

  • Personalised garments must be ironed inside out.
  • Wait 24 hours after application before washing it for the first time
  • Read and follow the garments’ washing instructions.

Recommended instructions and application parameters

  • Place the vinyl in the vinyl cutter and cut it in mirror mode. We recommend using a flock blade (60º). Remember to cut on the coloured side of the vinyl, the one without the backing. Only the Black/White vinyl must be cut on its white side because its backing is on the black layer.
  • Weed the vinyl by removing the excess material left around the design after cutting it. We recommend that you start from one corner, pulling up the excess HTV with one hand while holding down the backing with the other hand. This must be done very carefully, slowly but steadily. For very detailed designs, it is advisable to weed the vinyl with tweezers. When finished, the design will be visible on the backing.
  • Preheat the press to 165ºC.
  • Place the garment you want to personalise on the press’ platen.
  • Prepress for a few seconds to make sure you remove all of the wrinkles.
  • Position the vinyl on the garment. The bottom layer (colour layer) should be in direct contact with the garment.
  • Cover with protective paper and press for 20 seconds, low pressure.
  • Peel the backing from the design after letting it cool completely.

Additional Information

Reference nº 925 852
Post your question

Questions and Answers

There are no entries.

The legal stuff about cookies:


This message requires us to tell you about our cookie policy.

If you continue browsing, we'll assume you accept it and think it's okay.

Don't worry, this message only comes up once.