Search
Sublimation Photo Slates
Rock photo slates for photo frames or tabletop picture frames you can personalise with dye sublimation printing.
- 9 mm thick natural rock slate
- Irregular edges typical of the stone
- Available in a variety of sizes and shapes, with glossy or matte finish
- Includes pair of plastic stands
Availability:
Shown on each product
Please, give us an estimate of the quantity you need:
Get free € to redeem on your next order by buying these products. Discover the Brildor Loyalty Program
Get free € to redeem on your next order by buying these products. Discover the Brildor Loyalty Program
Related Products
More information about the sublimation photo slates
INDEX
> Recommended instructions and parameters for sublimation printing
DESCRIPTION
- Made of slate rock with a polyester polymer coated side suitable for sublimation
- Bevelled edges reveal the irregular cuts in the stone, simulating chisel marks
- Shipped wrapped in bubble wrap inside an individual cardboard box
THINGS TO KEEP IN MIND
- The slates may have some irregularities due to the material from which they are made
- Printable side delimited by an irregular border; in some areas, the lacquer extends beyond this border
- Each tabletop stand measures 8.1 x 4.4 x 1.2 cm
DIMENSIONS
Approximate values provided for guidance purposes. They may vary by 1 to 2 cm due to the inherent irregularities of the material.
| Reference no | Shape |
Finish |
Photo Slates (cm) |
Print area (cm) |
Weight (kg) |
| 036363 050497 |
Rectangular | Gloss Matte |
10 x 15 | 13.2 x 8.5 | 0.266 |
| 020030 050593 |
Rectangular | Gloss Matte |
15 x 20 | 18 x 13 | 0.541 |
| 027971 050498 |
Rectangular | Gloss Matte |
20 x 30 | 28 x 18.5 | 1.138 |
| 050496 | Rectangular | Gloss | 15 x 30 |
28 x 13.5 | 0.825 |
| 056112 | Square | Matte | 14 x 14 | 13 x 13 |
0.444 |
| 035940 |
Square | Gloss | 15 x 15 | 12.5 x 12.5 | 0,398 |
| 030760 051488 |
Square | Gloss Matte |
20 x 20 | 18.5 x 18.5 | 0.749 |
| 051489 051490 |
Square | Gloss Matte |
30 x 30 | 28.5 x 28.5 | 1.664 |
| 033796 056118 |
Heart | Gloss Matte |
15 x 15 | 13.5 x 13.8 | 0.433 |
| 038063 | Heart | Gloss | 20 x 20 | 19 x 18.5 | 0.797 |
| 037966 051550 |
Bell | Gloss Matte |
20 x 20 | 20 x 19 | 0.813 |
| 050494 | Round | Gloss | Ø14 | Ø13 | 0.371 |
| 050495 | Round | Gloss | Ø30 | Ø29 | 1.829 |
| 050493 | Oval | Gloss | 27 x 36 | 26 x 35 | 1.976 |
Recommended instructions and parameters for sublimation printing
Parameters are given as a guide only. They may vary due to many factors such as the type of sublimation paper, ink or ambient temperature. Therefore, testing is recommended.
HEAT PRESS
- Choose your design and print it in mirror image
- Preheat the press to 200ºC
- To sublimate this product it is recommended to use a Nomex felt pad
- Place the Nomex felt pad on the lower platen of the press and cover with protective paper to prevent ink smudging
- Place the printed design face up on the Nomex felt pad and the photo slate face down in contact with the printed paper
- You can use heat tape to prevent the design from moving. You can also cover it with protective paper
- Press at 200ºC for 9 minutes, medium-high pressure
- Open the press and remove the printed photo slate using a protective glove
WITH A 3D VACUUM OVEN HEAT PRESS
- Print the design in mirror image
- Preheat the 3D oven to 200ºC
- Place the printed design face down on the white side of the photo slate and fix it with heat-resistant tape
- Put the photo slate on the top tray of the oven with the printable side facing upwards
- Close the membrane and vacuum, making sure there are no air bubbles left
- Bake for 7- 8 minutes
- Open the oven and take out the printed slate using a protective glove
- Carefully peel off the paper
| Ref. | 915967 |
|---|---|
| Colour | White |
| Surface material | Slate |
| Items | Photo holders |
| Marking techniques | Dye sublimation |
Write Your Own Review
Post your question