White Sublimable Mug with Cork Base

White Sublimable Mug with Cork Base
Customisable 11 oz mug for sublimation, with a removable cork base.
- Glossy white ceramic
- Suitable for microwave and dishwasher
- Print area: 22.5 x 8 cm

Related Products
More information about the White Sublimable Mug with Cork Base
INDEX
> Recommended sublimation instructions and parameters
DESCRIPTION
- Design with a narrower bottom to fit into the cork base and create an integrated finish
- Cylindrical body, fully sublimatable on its outer surface
- Customisable with a transfer press using 11 oz elements. Also suitable for use in a sublimation oven with clamps, silicone sheets or shrink bags
- Removable cork base that acts as a coaster. Protects surfaces from direct contact with the hot mug base
- Supplied in a kraft cardboard box
- The cork base can be personalised by laser engraving, UV DTF, adhesive vinyl...
THINGS TO KEEP IN MIND
- Remove the cork base before sublimating the mug to prevent it from being damaged by heat
- The cork base should not be placed in the microwave or dishwasher
- To sublimate the entire mug, it is advisable to use shrink bags, a heat gun and a sublimation oven. The top part can be sublimated with a transfer press as well as with a sublimation oven
MEASUREMENTS
| Capacity (oz ≈ ml) | 11 ≈ 320 |
| Print area (cm) | 22.5 x 8 |
| Inner diameter (cm) | Ø7.5 |
| Outer diameter (cm) | Ø8 |
| Height (with cork base) (cm) | 9.5 |
| Handle (cm) | 1.5 x 6.5 |
| Base (cm) | Ø6.7 |
| Mug-handle distance (cm) | 3 |
| Thickness (mm) | 4 |
| Cork base (cm) | Ø8 x 1.5 |
| Packing (cm) | 11.5 x 10 x 8.5 |
| Net weight (g) | 322 |
RECOMMENDED SUBLIMATION INSTRUCTIONS AND PARAMETERS
Parameters are indicative. It is recommended to carry out preliminary tests to make the necessary adjustments before starting production.
USING A MUG PRESS
- Print the design in mirror mode
- Heat the press to 180 ºC
- Place the paper with the printed side onto the mug and secure it with heat-resistant adhesive tape
- Close the press with medium-high pressure for 200 seconds
- With the help of a protective glove, remove the freshly sublimated mug
- Carefully remove the paper
USING A SUBLIMATION OVEN
- Print the design in mirror mode
- Heat the oven to 180 ºC
- Place the design, printed in mirror mode, around the mug and secure it using heat-resistant adhesive tape
- Adjust the clamp, or place the mug inside a shrink bag and heat with a heat gun, avoiding the formation of wrinkles. You can also use a silicone sheet
- Sublimate in the oven for 13-15 minutes
- With the help of a protective glove, remove the clamp, silicone sheet or shrink bag, as appropriate
- Carefully remove the paper from the mug
RELATED POSTS
Tips for getting started with ceramic mug sublimation printing
Oven sublimation with shrink bags
How to sublimate perfect and original mugs
| Ref. | 955651 |
|---|
Reviews
Share your opinion
It will only take a minute, and your opinion can help other customers.
Sign in to submit your review
Write a review
Rating
Add photos of your product (optional)
Sending review...
Error
Review sent Thank you for your interest!
Questions
No questions found for this product.
Be the first to ask a question!
Ask a question
Please complete the CAPTCHA
Submitting your question...
Error
Question Submitted Thank you for your interest!





