The store will not work correctly in the case when cookies are disabled.
The legal stuff about cookies:
This message requires us to tell you about our cookie policy. If you continue browsing, we'll assume you accept it and think it's okay.
Don't worry, this message only comes up once.
More information about the white matte sublimation mug
Cylindrical shape, suitable for sublimation on all its outer surface, except for the handle.
It is also possible to personalise it using laser engraving, transfer, self-adhesive vinyl, screen printing, DTF or UV printing.
If you wish to present this mug in an individual box, you will find some models in Related Products that you can purchase separately.
THINGS TO KEEP IN MIND
Avoid microwave use. Hand wash preferably.
DIMENSIONS (APPROX.)
Capacity
11 oz ≈ 325 ml
Base
8 cm
Inner diameter
7.5 cm
Outer diameter
8.2 cm
Height
9.6 cm
Handle
1.5 x 7.3 cm
Thickness
3 mm
Mug-to-handle distance
3 cm
Print area
24 x 9.5 cm
Weight
328 g
Recommended instructions and parameters for sublimation printing
WITH A MUG HEAT PRESS
Print the design in mirror image.
Preheat the press to 200ºC
Hold the paper's printed side against the mug and fix it with heat-resistant tape.
Press for 180 seconds, medium-heavy pressure.
Remove the newly printed mug using a protective glove.
Carefully peel off the paper.
WITH A SUBLIMATION OVEN
Print the design in mirror image.
Preheat the press to 200ºC
Hold the paper's printed side against the mug and fix it with heat-resistant tape.
Adjust the clamp, or place the mug in a heat shrink bag and heat it with a heat gun. Make sure you get rid of all the wrinkles. You can also use a silicone sheet.
Sublimate inside the oven for 15 minutes
Using a protective glove, remove the wrap, the silicone sheet, or the bag, depending on the accessory you used.